[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] net/mlx4_core: print firmware version during driver loading
From: Qing Huang <>
Date: Fri, 14 Sep 2018 11:33:40 -0700

> On 9/14/2018 11:17 AM, Andrew Lunn wrote:
>> On Fri, Sep 14, 2018 at 10:15:48AM -0700, Qing Huang wrote:
>>> The FW version is actually a very crucial piece of information and
>>> only
>>> printed once here
>>> when the driver is loaded. People tend to get confused when switching
>>> multiple FW files
>>> back and forth without running separate utility tools, especially at
>>> customer sites.
>>> IMHO, this information is very useful and only takes up very little
>>> log file
>>> space. :-)
>> Why not use ethtool -i ?
>> $ sudo ethtool -i eth0
>> driver: r8169
>> version: 2.3LK-NAPI
>> firmware-version: rtl8168g-2_0.0.1 02/06/13
>> Andrew
> Sure. You can also use ibstat or ibv_devinfo tool if they are
> installed. But it's not very
> convenient in some cases.
> E.g.
> A customer upgrades FW on HCAs and encounters issues. During triage,
> it's much easier
> to study customer uploaded log files when remotely testing different
> FW files.

Not a valid argument. You can print the ethtool output from initramfs
if necessary for triage.

I still stand by the fact that ethtool is the only fully reliable way
to obtain this information, the kernel log is not.

 \ /
  Last update: 2018-09-14 23:14    [W:0.051 / U:8.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site