lkml.org 
[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] dmaengine: imx-sdma: implement channel termination via worker
Date
The dmaengine documentation states that device_terminate_all may be
asynchronous and need not wait for the active transfers have stopped.

This allows us to move most of the functionality currently implemented
in the sdma channel termination function to run in a worker, outside
of any atomic context. Moving this out of atomic context has two
benefits: we can now sleep while waiting for the channel to terminate,
instead of busy waiting and the freeing of the dma descriptors happens
with IRQs enabled, getting rid of a warning in the dma mapping code.

As the termination is now asnc, we need to implement the
device_synchronize dma engine function, which simply waits for the
worker to finish its execution.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
v2: Keep vchan_get_all_descriptors in the terminate_all call, so the
worker doesn't corrupt the next transfer if that's already in
the setup process.
---
drivers/dma/imx-sdma.c | 42 ++++++++++++++++++++++++++++++++----------
1 file changed, 32 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 8d2fec8b16cc..da41e8fbf151 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -32,6 +32,7 @@
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
+#include <linux/workqueue.h>

#include <asm/irq.h>
#include <linux/platform_data/dma-imx-sdma.h>
@@ -375,6 +376,8 @@ struct sdma_channel {
u32 shp_addr, per_addr;
enum dma_status status;
struct imx_dma_data data;
+ struct work_struct terminate_worker;
+ struct list_head deferred_desc_list;
};

#define IMX_DMA_SG_LOOP BIT(0)
@@ -1025,31 +1028,47 @@ static int sdma_disable_channel(struct dma_chan *chan)

return 0;
}
+static void sdma_channel_terminate(struct work_struct *work)
+{
+ struct sdma_channel *sdmac = container_of(work, struct sdma_channel,
+ terminate_worker);
+
+ /*
+ * According to NXP R&D team a delay of one BD SDMA cost time
+ * (maximum is 1ms) should be added after disable of the channel
+ * bit, to ensure SDMA core has really been stopped after SDMA
+ * clients call .device_terminate_all.
+ */
+ usleep_range(1000, 2000);
+
+ vchan_dma_desc_free_list(&sdmac->vc, &sdmac->deferred_desc_list);
+ INIT_LIST_HEAD(&sdmac->deferred_desc_list);
+}

static int sdma_disable_channel_with_delay(struct dma_chan *chan)
{
struct sdma_channel *sdmac = to_sdma_chan(chan);
unsigned long flags;
- LIST_HEAD(head);

sdma_disable_channel(chan);
+
spin_lock_irqsave(&sdmac->vc.lock, flags);
- vchan_get_all_descriptors(&sdmac->vc, &head);
+ vchan_get_all_descriptors(&sdmac->vc, &sdmac->deferred_desc_list);
sdmac->desc = NULL;
spin_unlock_irqrestore(&sdmac->vc.lock, flags);
- vchan_dma_desc_free_list(&sdmac->vc, &head);

- /*
- * According to NXP R&D team a delay of one BD SDMA cost time
- * (maximum is 1ms) should be added after disable of the channel
- * bit, to ensure SDMA core has really been stopped after SDMA
- * clients call .device_terminate_all.
- */
- mdelay(1);
+ schedule_work(&sdmac->terminate_worker);

return 0;
}

+static void sdma_channel_synchronize(struct dma_chan *chan)
+{
+ struct sdma_channel *sdmac = to_sdma_chan(chan);
+
+ flush_work(&sdmac->terminate_worker);
+}
+
static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
{
struct sdma_engine *sdma = sdmac->sdma;
@@ -1993,6 +2012,8 @@ static int sdma_probe(struct platform_device *pdev)

sdmac->channel = i;
sdmac->vc.desc_free = sdma_desc_free;
+ INIT_WORK(&sdmac->terminate_worker, sdma_channel_terminate);
+ INIT_LIST_HEAD(&sdmac->deferred_desc_list);
/*
* Add the channel to the DMAC list. Do not add channel 0 though
* because we need it internally in the SDMA driver. This also means
@@ -2045,6 +2066,7 @@ static int sdma_probe(struct platform_device *pdev)
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
sdma->dma_device.device_config = sdma_config;
sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
+ sdma->dma_device.device_synchronize = sdma_channel_synchronize;
sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS;
sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS;
sdma->dma_device.directions = SDMA_DMA_DIRECTIONS;
--
2.19.0
\
 
 \ /
  Last update: 2018-09-14 19:07    [W:0.067 / U:4.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site