lkml.org 
[lkml]   [2018]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/7] MIPS: mscc: ocelot: add GPIO4 pinmuxing DT node
Hi Alexandre,

On Fri, Sep 14, 2018 at 04:54:46PM +0200, Alexandre Belloni wrote:
> Hi,
>
> On 14/09/2018 11:44:26+0200, Quentin Schulz wrote:
> > In order to use GPIO4 as a GPIO, we need to mux it in this mode so let's
> > declare a new pinctrl DT node for it.
> >
> > Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
> > ---
> > arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
> > index 8ce317c..b5c4c74 100644
> > --- a/arch/mips/boot/dts/mscc/ocelot.dtsi
> > +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
> > @@ -182,6 +182,11 @@
> > interrupts = <13>;
> > #interrupt-cells = <2>;
> >
> > + gpio4: gpio4 {
> > + pins = "GPIO_4";
> > + function = "gpio";
> > + };
> > +
>
> For a GPIO, I would do that in the board dts because it is not used
> directly in the dtsi.
>

And the day we've two boards using this pinctrl we move it to a dtsi. Is
that the plan?

Thanks,
Quentin
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-09-14 18:27    [W:0.095 / U:1.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site