lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RESEND] arm64: dts: meson: Switch simple-mfd and syscon order
Date
The order between "syscon" and "simple-mfd" is important because in these
particular cases, the node needs to be first a "simple-mfd" to expose
it's sub-nodes, and later on a "syscon" to permit other nodes to access
this register space through the "syscon" mechanism.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Hi Kevin,

I rebased the patch on top of your v4.20/dt64 branch.

Neil

arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 9f61407..df017db 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -965,7 +965,7 @@

sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
- "syscon", "simple-mfd";
+ "simple-mfd", "syscon";
reg = <0 0 0 0x400>;

clkc: clock-controller {
@@ -1209,7 +1209,7 @@
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;

sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;

clkc_AO: clock-controller {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 49c22f2..f1e5cdb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -344,7 +344,7 @@
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;

sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;

pwrc_vpu: power-controller-vpu {
@@ -444,7 +444,7 @@
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;

sysctrl: system-controller@0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0 0 0 0x400>;
};

--
2.7.4
\
 
 \ /
  Last update: 2018-09-13 09:13    [W:0.037 / U:1.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site