lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BISECTED] Regression: Solidrun Clearfog Base won't boot since "PCI: mvebu: Only remap I/O space if configured"
On Wed, Sep 12, 2018 at 09:49:41PM +0300, Baruch Siach wrote:
> I reproduced the same Oops on Clearfog Base without any taint:
>
> [ 1.476401] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
...
> [ 1.855954] Code: e2844004 e5972000 e3520000 0affffee (e7f001f2)

That is a BUG(). Please turn on verbose bug reporting to get more
information about the cause.

There are two possibilities:

BUG_ON(addr >= end);

and

BUG_ON(!pte_none(*pte));

It's probably the latter - the region is probably already mapped, that
being the PCI IO region.

The original driver was setup to call pci_ioremap_io() as the very
last thing - and as the driver is non-removable, we were guaranteed
to never tear down this mapping (which is sensible, it's published
to userspace.)

However, the current code calls pci_ioremap_io() much earlier, in
a path where probe failures can occur. This breaks pci_ioremap_io()'s
requirements - it must not be called more than once. So:

ee1604381a37 ("PCI: mvebu: Only remap I/O space if configured")

is basically incorrect - pci_ioremap_io() needs to move back to a
place where it is only called in a path which will never fail.
However, looking at the generic host bits, I'm not sure such a place
exists in the new effort to make stuff more generic.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up

\
 
 \ /
  Last update: 2018-09-13 01:11    [W:0.095 / U:16.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site