lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/50] mxser: switch to ->[sg]et_serial()
Date
From: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
drivers/tty/mxser.c | 97 ++++++++++++++++++++++++++++-------------------------
1 file changed, 51 insertions(+), 46 deletions(-)

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 8bc15cb67a58..9d00ff5ef961 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1207,76 +1207,90 @@ static int mxser_chars_in_buffer(struct tty_struct *tty)
* ------------------------------------------------------------
*/
static int mxser_get_serial_info(struct tty_struct *tty,
- struct serial_struct __user *retinfo)
+ struct serial_struct *ss)
{
struct mxser_port *info = tty->driver_data;
- struct serial_struct tmp = {
- .type = info->type,
- .line = tty->index,
- .port = info->ioaddr,
- .irq = info->board->irq,
- .flags = info->port.flags,
- .baud_base = info->baud_base,
- .close_delay = info->port.close_delay,
- .closing_wait = info->port.closing_wait,
- .custom_divisor = info->custom_divisor,
- };
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
+ struct tty_port *port = &info->port;
+
+ if (tty->index == MXSER_PORTS)
+ return -ENOTTY;
+
+ mutex_lock(&port->mutex);
+ ss->type = info->type,
+ ss->line = tty->index,
+ ss->port = info->ioaddr,
+ ss->irq = info->board->irq,
+ ss->flags = info->port.flags,
+ ss->baud_base = info->baud_base,
+ ss->close_delay = info->port.close_delay,
+ ss->closing_wait = info->port.closing_wait,
+ ss->custom_divisor = info->custom_divisor,
+ mutex_unlock(&port->mutex);
return 0;
}

static int mxser_set_serial_info(struct tty_struct *tty,
- struct serial_struct __user *new_info)
+ struct serial_struct *ss)
{
struct mxser_port *info = tty->driver_data;
struct tty_port *port = &info->port;
- struct serial_struct new_serial;
speed_t baud;
unsigned long sl_flags;
unsigned int flags;
int retval = 0;

- if (!new_info || !info->ioaddr)
+ if (tty->index == MXSER_PORTS)
+ return -ENOTTY;
+ if (tty_io_error(tty))
+ return -EIO;
+
+ mutex_lock(&port->mutex);
+ if (!info->ioaddr) {
+ mutex_unlock(&port->mutex);
return -ENODEV;
- if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
- return -EFAULT;
+ }

- if (new_serial.irq != info->board->irq ||
- new_serial.port != info->ioaddr)
+ if (ss->irq != info->board->irq ||
+ ss->port != info->ioaddr) {
+ mutex_unlock(&port->mutex);
return -EINVAL;
+ }

flags = port->flags & ASYNC_SPD_MASK;

if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.close_delay != info->port.close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
+ if ((ss->baud_base != info->baud_base) ||
+ (ss->close_delay != info->port.close_delay) ||
+ ((ss->flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) {
+ mutex_unlock(&port->mutex);
return -EPERM;
+ }
info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
+ (ss->flags & ASYNC_USR_MASK));
} else {
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
port->flags = ((port->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- port->close_delay = new_serial.close_delay * HZ / 100;
- port->closing_wait = new_serial.closing_wait * HZ / 100;
+ (ss->flags & ASYNC_FLAGS));
+ port->close_delay = ss->close_delay * HZ / 100;
+ port->closing_wait = ss->closing_wait * HZ / 100;
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
- (new_serial.baud_base != info->baud_base ||
- new_serial.custom_divisor !=
+ (ss->baud_base != info->baud_base ||
+ ss->custom_divisor !=
info->custom_divisor)) {
- if (new_serial.custom_divisor == 0)
+ if (ss->custom_divisor == 0) {
+ mutex_unlock(&port->mutex);
return -EINVAL;
- baud = new_serial.baud_base / new_serial.custom_divisor;
+ }
+ baud = ss->baud_base / ss->custom_divisor;
tty_encode_baud_rate(tty, baud, baud);
}
}

- info->type = new_serial.type;
+ info->type = ss->type;

process_txrx_fifo(info);

@@ -1291,6 +1305,7 @@ static int mxser_set_serial_info(struct tty_struct *tty,
if (retval == 0)
tty_port_set_initialized(port, 1);
}
+ mutex_unlock(&port->mutex);
return retval;
}

@@ -1660,11 +1675,9 @@ static int mxser_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct mxser_port *info = tty->driver_data;
- struct tty_port *port = &info->port;
struct async_icount cnow;
unsigned long flags;
void __user *argp = (void __user *)arg;
- int retval;

if (tty->index == MXSER_PORTS)
return mxser_ioctl_special(cmd, argp);
@@ -1708,20 +1721,10 @@ static int mxser_ioctl(struct tty_struct *tty,
return 0;
}

- if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && tty_io_error(tty))
+ if (cmd != TIOCMIWAIT && tty_io_error(tty))
return -EIO;

switch (cmd) {
- case TIOCGSERIAL:
- mutex_lock(&port->mutex);
- retval = mxser_get_serial_info(tty, argp);
- mutex_unlock(&port->mutex);
- return retval;
- case TIOCSSERIAL:
- mutex_lock(&port->mutex);
- retval = mxser_set_serial_info(tty, argp);
- mutex_unlock(&port->mutex);
- return retval;
case TIOCSERGETLSR: /* Get line status register */
return mxser_get_lsr_info(info, argp);
/*
@@ -2325,6 +2328,8 @@ static const struct tty_operations mxser_ops = {
.wait_until_sent = mxser_wait_until_sent,
.tiocmget = mxser_tiocmget,
.tiocmset = mxser_tiocmset,
+ .set_serial = mxser_set_serial_info,
+ .get_serial = mxser_get_serial_info,
.get_icount = mxser_get_icount,
};

--
2.11.0
\
 
 \ /
  Last update: 2018-09-13 04:41    [W:0.424 / U:4.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site