lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] ASoC: enable interrupt after dma buffer initialization
Date
In snd_hdac_bus_init_chip(), we enable interrupt before
snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has
been acquired and irq handler uses the dma buffer, kernel may crash
when interrupt comes in.

Fix the problem by postponing enabling irq after dma buffer
initialization. And warn once on null dma buffer pointer during the
initialization.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Yu Zhao <yuzhao@google.com>
---
sound/hda/hdac_controller.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 560ec0986e1a..11057d9f84ec 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -40,6 +40,8 @@ static void azx_clear_corbrp(struct hdac_bus *bus)
*/
void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
{
+ WARN_ON_ONCE(!bus->rb.area);
+
spin_lock_irq(&bus->reg_lock);
/* CORB set up */
bus->corb.addr = bus->rb.addr;
@@ -479,13 +481,15 @@ bool snd_hdac_bus_init_chip(struct hdac_bus *bus, bool full_reset)
/* reset controller */
azx_reset(bus, full_reset);

- /* initialize interrupts */
+ /* clear interrupts */
azx_int_clear(bus);
- azx_int_enable(bus);

/* initialize the codec command I/O */
snd_hdac_bus_init_cmd_io(bus);

+ /* enable interrupts after CORB/RIRB buffers are initialized above */
+ azx_int_enable(bus);
+
/* program the position buffer */
if (bus->use_posbuf && bus->posbuf.addr) {
snd_hdac_chip_writel(bus, DPLBASE, (u32)bus->posbuf.addr);
--
2.19.0.rc2.392.g5ba43deb5a-goog
\
 
 \ /
  Last update: 2018-09-12 21:46    [W:0.151 / U:10.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site