[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/8] drm/bridge: add bus flag support
This v2 shifted a bit more to rework bridge timing support. While
my use case mainly cares about complete bus flag support, it seems
to me that bus timings have ended up to be more complex than
necessary. Patch 2/3 are an attempt to simplify bus timings. This
also aligns bridge timings with how display timings are specified

@Linus Walleij, Laurent Pinchart: Since you have been involved in
the initial bus timings discussion, I would like to have your Ack
on at least patch 2/3... If we want to keep the setup/hold timings,
the patchset should also work without those two patches.


Changes in v2:
- Rename bus_flags to simple_bus_flags
- Reword dt-bindings for de-active
- Add patch 2/3 which attempts to simplify bridge timings

Stefan Agner (8):
drm/bridge: use bus flags in bridge timings
drm/pl111: simplify bridge timing support
drm/bridge: simplify bridge timing info
drm/bridge: allow to specify data-enable polarity
dt-bindings: display: add data-enable polarity property
drm/imx: support handling bridge timings bus flags
ARM: dts: imx6qdl-apalis: add VGA support
ARM: dts: imx6qdl-apalis: add GPIO I2C node for DDC

.../bindings/display/bridge/dumb-vga-dac.txt | 2 +
arch/arm/boot/dts/imx6q-apalis-eval.dts | 28 ++++++++
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 72 +++++++++++++++++++
drivers/gpu/drm/bridge/dumb-vga-dac.c | 45 +++++++-----
drivers/gpu/drm/imx/parallel-display.c | 3 +
drivers/gpu/drm/pl111/pl111_display.c | 22 ++----
include/drm/drm_bridge.h | 25 ++-----
7 files changed, 142 insertions(+), 55 deletions(-)


 \ /
  Last update: 2018-09-12 20:33    [W:0.220 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site