lkml.org 
[lkml]   [2018]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] option: Improve Quectel EP06 detection
From
Date
On 9/11/2018 21:34, Kristian Evensen wrote:
> On Tue, Sep 11, 2018 at 4:00 PM Lars Melin <larsm17@gmail.com> wrote:

>> My opinion is that the option and qmi-wwan drivers should support EP06
>> in the factory delivery configuration and not in a configuration the
>> user has selected with a Quectel proprietary AT cmd.
>> Can you give some good reason for disabling an interface instead of
>> letting it stay but not use it if you don't need it?
>
> Yes. I am working with two boards, one based on MT7621 and the other
> on MT7623, and I would like to connect two EP06-modems to these
> boards. However, the USB-controller used on these SoCs has a (very)
> limited number of USB endpoints. With the default configuration, there
> are only enough endpoints for one EP06-modem to work properly. By
> disabling diag, there are enough endpoints for both modems to work
> correctly.
>
> BR,
> Kristian
>

You have chosen a platform which has limited usb resources and want to
solve that problem by adjusting the device driver?
Why don't you just unbind those interfaces which you are not using and
which are eating up your usb resources?

Thanks
/Lars

\
 
 \ /
  Last update: 2018-09-12 18:32    [W:0.078 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site