lkml.org 
[lkml]   [2018]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] rtc: abx80x: add basic watchdog support
On Mon, Sep 10, 2018 at 03:36:54PM -0600, Jeremy Gebben wrote:
> The abx804 and abx805 chips have support for a simple watchdog
> function that can trigger an external reset.
>
> Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>

I am missing the "select WATCHDOG_CORE" that would normally go
with watchdog drivers. If you don't want a separate configuration
option for the watchdog, you'll still need something like

select WATCHDOG_CORE if WATCHDOG

in the Kconfig entry for this driver.

> ---
> drivers/rtc/rtc-abx80x.c | 132 +++++++++++++++++++++++++++++++++++++--
> 1 file changed, 128 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
> index 9d49054a0a4a..e1ec4cce093a 100644
> --- a/drivers/rtc/rtc-abx80x.c
> +++ b/drivers/rtc/rtc-abx80x.c
> @@ -17,6 +17,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/rtc.h>
> +#include <linux/watchdog.h>
>
> #define ABX8XX_REG_HTH 0x00
> #define ABX8XX_REG_SC 0x01
> @@ -37,6 +38,7 @@
>
> #define ABX8XX_REG_STATUS 0x0f
> #define ABX8XX_STATUS_AF BIT(2)
> +#define ABX8XX_STATUS_WDT BIT(6)
>
> #define ABX8XX_REG_CTRL1 0x10
> #define ABX8XX_CTRL_WRITE BIT(0)
> @@ -61,6 +63,14 @@
> #define ABX8XX_OSS_OF BIT(1)
> #define ABX8XX_OSS_OMODE BIT(4)
>
> +#define ABX8XX_REG_WDT 0x1b
> +#define ABX8XX_WDT_WDS BIT(7)
> +#define ABX8XX_WDT_BMB_MASK 0x7c
> +#define ABX8XX_WDT_BMB_SHIFT 2
> +#define ABX8XX_WDT_MAX_TIME (ABX8XX_WDT_BMB_MASK >> ABX8XX_WDT_BMB_SHIFT)
> +#define ABX8XX_WDT_WRB_MASK 0x03
> +#define ABX8XX_WDT_WRB_1HZ 0x02
> +
> #define ABX8XX_REG_CFG_KEY 0x1f
> #define ABX8XX_CFG_KEY_OSC 0xa1
> #define ABX8XX_CFG_KEY_MISC 0x9d
> @@ -80,23 +90,25 @@ enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
> struct abx80x_cap {
> u16 pn;
> bool has_tc;
> + bool has_wdog;
> };
>
> static struct abx80x_cap abx80x_caps[] = {
> [AB0801] = {.pn = 0x0801},
> [AB0803] = {.pn = 0x0803},
> - [AB0804] = {.pn = 0x0804, .has_tc = true},
> - [AB0805] = {.pn = 0x0805, .has_tc = true},
> + [AB0804] = {.pn = 0x0804, .has_tc = true, .has_wdog = true},
> + [AB0805] = {.pn = 0x0805, .has_tc = true, .has_wdog = true},
> [AB1801] = {.pn = 0x1801},
> [AB1803] = {.pn = 0x1803},
> - [AB1804] = {.pn = 0x1804, .has_tc = true},
> - [AB1805] = {.pn = 0x1805, .has_tc = true},
> + [AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true},
> + [AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
> [ABX80X] = {.pn = 0}
> };
>
> struct abx80x_priv {
> struct rtc_device *rtc;
> struct i2c_client *client;
> + struct watchdog_device wdog;
> };
>
> static int abx80x_is_rc_mode(struct i2c_client *client)
> @@ -234,6 +246,13 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id)
> if (status & ABX8XX_STATUS_AF)
> rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
>
> + /*
> + * It is unclear if we'll get an interrupt before the external
> + * reset kicks in.
> + */
> + if (status & ABX8XX_STATUS_WDT)
> + dev_alert(&client->dev, "watchdog timeout interrupt.\n");
> +
> i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0);
>
> return IRQ_HANDLED;
> @@ -535,6 +554,105 @@ static void rtc_calib_remove_sysfs_group(void *_dev)
> sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
> }
>
> +#ifdef CONFIG_WATCHDOG
> +
> +static inline u8 timeout_bits(unsigned int timeout)
> +{
> + return ((timeout << ABX8XX_WDT_BMB_SHIFT) & ABX8XX_WDT_BMB_MASK) |
> + ABX8XX_WDT_WRB_1HZ;
> +}
> +
> +static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog,
> + unsigned int timeout)
> +{
> + struct abx80x_priv *priv = watchdog_get_drvdata(wdog);
> + u8 val = ABX8XX_WDT_WDS | timeout_bits(timeout);
> +
> + /*
> + * Writing any timeout to the WDT register resets the watchdog timer.
> + * Writing 0 disables it.
> + */
> + return i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_WDT, val);
> +}
> +
> +static int abx80x_wdog_set_timeout(struct watchdog_device *wdog,
> + unsigned int new_timeout)

I'll leave multi-line alignment issues to the driver maintainer.

> +{
> + int err = __abx80x_wdog_set_timeout(wdog, new_timeout);
> +

This will unconditionally enable the watchdog, even if it is currently
disabled.

> + if (err)
> + return err;
> +
> + wdog->timeout = new_timeout;
> + return 0;
> +}
> +
> +static int abx80x_wdog_ping(struct watchdog_device *wdog)
> +{
> + return __abx80x_wdog_set_timeout(wdog, wdog->timeout);
> +}
> +
> +static int abx80x_wdog_start(struct watchdog_device *wdog)
> +{
> + int err = __abx80x_wdog_set_timeout(wdog, wdog->timeout);
> +
> + if (err)
> + return err;
> +
> + set_bit(WDOG_HW_RUNNING, &wdog->status);

This is only necessary if the watchdog is running at probe,
or if it can not be stopped.

> + return 0;
> +}
> +
> +static int abx80x_wdog_stop(struct watchdog_device *wdog)
> +{
> + int err = __abx80x_wdog_set_timeout(wdog, 0);
> +
> + if (err)
> + return err;
> +
> + clear_bit(WDOG_HW_RUNNING, &wdog->status);

This suggests that the watchdog can be stopped, thus it is
unnecessary to set or clear the bit.

> + return 0;
> +}
> +
> +static const struct watchdog_info abx80x_wdog_info = {
> + .identity = "abx80x watchdog",
> + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
> +};
> +
> +static const struct watchdog_ops abx80x_wdog_ops = {
> + .owner = THIS_MODULE,
> + .start = abx80x_wdog_start,
> + .stop = abx80x_wdog_stop,
> + .ping = abx80x_wdog_ping,
> + .set_timeout = abx80x_wdog_set_timeout,
> +};
> +
> +static int abx80x_setup_watchdog(struct abx80x_priv *priv)
> +{
> + int err;
> +
> + priv->wdog.ops = &abx80x_wdog_ops;
> + priv->wdog.info = &abx80x_wdog_info;
> + priv->wdog.min_timeout = 1;
> + priv->wdog.max_timeout = ABX8XX_WDT_MAX_TIME;

priv->wdog.parent should be set.

> +
> + err = devm_watchdog_register_device(&priv->client->dev,
> + &priv->wdog);
> + if (err)
> + return err;
> +
> + watchdog_set_drvdata(&priv->wdog, priv);

This is too late and racy; it must be called prior to registration.

> + watchdog_init_timeout(&priv->wdog, ABX8XX_WDT_MAX_TIME,
> + &priv->client->dev);

This is quite pointless. Just set
priv->wdog.timeout = ABX8XX_WDT_MAX_TIME;
above (prior to registration). If the idea is to be able to pick
a timeout value from devicetree, you would still set the default
value above and make the call
watchdog_init_timeout(&priv->wdog, 0, &priv->client->dev);
but again prior to registration.

> + return 0;
> +}
> +#else
> +static int abx80x_setup_watchdog(struct abx80x_priv *priv)
> +{
> + return 0;
> +}
> +#endif
> +
> static int abx80x_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -629,6 +747,12 @@ static int abx80x_probe(struct i2c_client *client,
>
> i2c_set_clientdata(client, priv);
>
> + if (abx80x_caps[part].has_wdog) {
> + err = abx80x_setup_watchdog(priv);
> + if (err)
> + return err;
> + }
> +
> if (client->irq > 0) {
> dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
> err = devm_request_threaded_irq(&client->dev, client->irq, NULL,
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-09-11 01:21    [W:6.185 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site