lkml.org 
[lkml]   [2018]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] option: Improve Quectel EP06 detection
From
Date
On Sat, 2018-09-08 at 14:57 +0200, Kristian Evensen wrote:
> The Quectel EP06 (and EM06/EG06) LTE modem supports updating the USB
> configuration, without the VID/PID or configuration number changing.
> When the configuration is updated and interfaces are added/removed,
> the
> interface numbers are updated. This causes our current code for
> matching
> EP06 not to work as intended, as the assumption about reserved
> interfaces no longer holds. If for example the diagnostic (first)
> interface is removed, option will (try to) bind to the QMI interface.
>
> This patch improves EP06 detection by replacing the current match
> with
> two matches, and those matches check class, subclass and protocol as
> well as VID and PID. The diag interface exports class, subclass and
> protocol as 0xff. For the other serial interfaces, class is 0xff and
> subclass and protocol are both 0x0.
>
> The modem can export the following devices and always in this order:
> diag, nmea, at, ppp. qmi and adb. This means that diag can only ever
> be
> interface 0, and interface numbers 1-5 should be marked as reserved.
> The
> three other serial devices can have interface numbers 0-3, but I have
> not marked any interfaces as reserved. The reason is that the serial
> devices are the only interfaces exported by the device where subclass
> and protocol is 0x0.
>
> QMI exports the same class, subclass and protocol values as the diag
> interface. However, the two interfaces have different number of
> endpoints, QMI has three and diag two. I have added a check for
> number
> of interfaces if VID/PID matches the EP06, and we ignore the device
> if
> number of interfaces equals three (and subclass is set).

I double-checked the permutations & logic and it makes sense to me.

Acked-by: Dan Williams <dcbw@redhat.com>

> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
> ---
> drivers/usb/serial/option.c | 17 +++++++++++++++--
> 1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/serial/option.c
> b/drivers/usb/serial/option.c
> index 0215b70c4efc..835dcd2875a7 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -1081,8 +1081,9 @@ static const struct usb_device_id option_ids[]
> = {
> .driver_info = RSVD(4) },
> { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
> .driver_info = RSVD(4) },
> - { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06),
> - .driver_info = RSVD(4) | RSVD(5) },
> + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID,
> QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
> + .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) |
> RSVD(5) },
> + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID,
> QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
> { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
> { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
> { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
> @@ -1985,6 +1986,7 @@ static int option_probe(struct usb_serial
> *serial,
> {
> struct usb_interface_descriptor *iface_desc =
> &serial->interface->cur_altsetting-
> >desc;
> + struct usb_device_descriptor *dev_desc = &serial->dev-
> >descriptor;
> unsigned long device_flags = id->driver_info;
>
> /* Never bind to the CD-Rom emulation interface */
> @@ -1999,6 +2001,17 @@ static int option_probe(struct usb_serial
> *serial,
> if (device_flags & RSVD(iface_desc->bInterfaceNumber))
> return -ENODEV;
>
> + /*
> + * Don't bind to the QMI device of the Quectel
> EP06/EG06/EM06. Class,
> + * subclass and protocol is 0xff for both the diagnostic
> port and the
> + * QMI interface, but the diagnostic port only has two
> endpoints (QMI
> + * has three).
> + */
> + if (dev_desc->idVendor == cpu_to_le16(QUECTEL_VENDOR_ID) &&
> + dev_desc->idProduct == cpu_to_le16(QUECTEL_PRODUCT_EP06)
> &&
> + iface_desc->bInterfaceSubClass && iface_desc-
> >bNumEndpoints == 3)
> + return -ENODEV;
> +
> /* Store the device flags so we can use them during attach.
> */
> usb_set_serial_data(serial, (void *)device_flags);
>

\
 
 \ /
  Last update: 2018-09-10 16:44    [W:0.170 / U:2.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site