lkml.org 
[lkml]   [2018]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND 2/2] gpio: mvebu: Allow to use non-default PWM counter
> I'm not sure that the logic:
> 1. Default counter assigned to the bank
> 2. Unused counter that is assigned to other bank
> 3. Fallback to default counter
> is the best one.

Hi Richard

It it totally broken, as you point out. That is why i said it needs to
be limited to two PWMs.

> IMHO, I would either:
> - allow only 2 pwm and no more (but that's a pity)
> - allow lots of fans, but once 2 different speeds are set, return
> EINVAL for another different speed (even if it's on another bank)

This second option also breaks the Linux PWM model.

What you should be thinking about is extending the Linux PWM model so
that one PWM can drive more than one pin.

Andrew

\
 
 \ /
  Last update: 2018-08-09 17:43    [W:0.079 / U:8.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site