lkml.org 
[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] dt: bindings: lm3697: Add bindings for lm3697 driver
On Wed 2018-08-08 16:41:16, Dan Murphy wrote:
> On 08/08/2018 04:09 PM, Pavel Machek wrote:
> > On Wed 2018-08-08 16:04:43, Dan Murphy wrote:
> >> On 08/08/2018 04:02 PM, Pavel Machek wrote:
> >>> Hi!
> >>>
> >>>>>> + - #size-cells : 0
> >>>>>> + - control-bank-cfg - : Indicates which sink is connected to which control bank
> >>>>>> + 0 - All HVLED outputs are controlled by bank A
> >>>>>> + 1 - HVLED1 is controlled bank B, HVLED2/3 are controlled by bank A
> >>>>>> + 2 - HVLED2 is controlled bank B, HVLED1/3 are controlled by bank A
> >>>>>> + 3 - HVLED1/2 are controlled by bank B, HVLED3 is controlled by bank A
> >>>>>> + 4 - HVLED3 is controlled by bank B, HVLED1/2 are controlled by bank A
> >>>>>> + 5 - HVLED1/3 is controlled by bank B, HVLED2 is controlled by bank A
> >>>>>> + 6 - (default) HVLED1 is controlled by bank A, HVLED2/3 are controlled by bank B
> >>>>>> + 7 - All HVLED outputs are controlled by bank B
> >>>>>
> >>>>> This is quite long way to describe a bitmask, no? Could we make
> >>>>> it so that control-bank-cfg is not needed?
> >>>>
> >>>> The problem we have here is there is a potential to control
> >>>> 3 different LED string but only 2 sinks. So control bank A can control 2 LED strings and control
> >>>> bank b can control 1 LED string.
> >>>>
> >>>
> >>> Can we forget about the LED strings, and just expose the sinks as
> >>> Linux LED devices?
> >>
> >> 2 sinks 3 LED strings. How do you know which LED string is which and what bank it belongs
> >> to when setting the brightness. Each Bank has a separate register for brightness control.
> >
> > Yes, and LED strings are statically assigned to banks, right?
> >
> > So why not simply forget about LED strings for sake of hw
> > abstractions, and work just with banks?
>
> How would you set the control bank register for the correct LED string configuration?

Have property at each LED saying which which HVLEDs it controls?

Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-08-08 23:46    [W:0.064 / U:3.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site