Messages in this thread |  | | Date | Wed, 8 Aug 2018 19:42:42 +0200 | From | Miquel Raynal <> | Subject | Re: [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer |
| |
Hi Janusz,
Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote on Wed, 08 Aug 2018 18:55:35 +0200:
> Hi Boris, > > On Tuesday, August 7, 2018 8:57:52 PM CEST Boris Brezillon wrote: > > On Tue, 7 Aug 2018 00:29:13 +0200 > > Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote: > > > > > In its current shape, the driver sets data port direction before each > > > byte read/write operation, even during multi-byte transfers. Since > > > performance of the driver is completely not acceptable on Amstrad Delta > > > after it has been converted to GPIO bitbang, try to improve things a > > > bit by setting the port direction only on first byte of each transfer. > > ... > > I'd suggest a slightly different approach where the data pins > > direction state is stored in the the priv struct and only changed when > > required. This way you just have to add a test in > > ams_delta_read/write_byte(). > > Good idea, I'm going to use it, thanks. > > Once done, may I also move that one earlier in the series so that it can be > applied while our discussion on GPIO bitmap changes still continues?
I think I may answer on his behalf: yes! You can move the GPIO bitmap changes at the end of the series, checking that you never break the bisectability. Then I could apply the major changes and let us iterate on the GPIO bitmap stuff only.
Thanks, Miquèl
|  |