lkml.org 
[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm: dts: am4372: setup rtc as system-power-controller
From
Date


On Wednesday 08 August 2018 02:36 PM, Tony Lindgren wrote:
> * Keerthy <j-keerthy@ti.com> [180725 05:59]:
>> RTC alarm2 is connected to pmic_en line and hence can be used to control
>> the pmic enabling/disabling. Hence add the system-power-controller for rtc
>> node.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>> arch/arm/boot/dts/am4372.dtsi | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
>> index f0cbd86..d4b7c59 100644
>> --- a/arch/arm/boot/dts/am4372.dtsi
>> +++ b/arch/arm/boot/dts/am4372.dtsi
>> @@ -469,6 +469,7 @@
>> ti,hwmods = "rtc";
>> clocks = <&clk_32768_ck>;
>> clock-names = "int-clk";
>> + system-power-controller;
>> status = "disabled";
>> };
>>
>
> Should this be queued as a fix for v4.19-rc series?

Yes this makes pmic to shutdown during power off.

>
> Regards,
>
> Tony
>

\
 
 \ /
  Last update: 2018-08-08 11:08    [W:0.061 / U:2.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site