[lkml]   [2018]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH RESEND RFC 1/4] drivers: pinctrl: qcom: add wakeup capability to GPIO
On Tue, 07 Aug 2018 23:05:07 -0700
Stephen Boyd <> wrote:

> Quoting Lina Iyer (2018-08-02 05:58:27)
> > On Thu, Aug 02 2018 at 01:27 -0600, Marc Zyngier wrote:
> > >
> > >Sure. But once woken up (GIC *and* TLMM), the gpio line (which I
> > >assume is level) is still high at the TLMM input. So why isn't it
> > >registering that state once it has been woken up?
> > >
> > >I can understand that it would be missing an edge. But that doesn't
> > >hold for level signalling.
> > >
> > Sure, yes. Sorry for not registering your point in my response.
> > Once woken up we should see the level interrupt in TLMM.
> And the level type gpio interrupt will trigger the TLMM summary
> interrupt line after the wakeup? So then the only thing that needs to be
> replayed is edge interrupts? How are edge interrupts going to be
> replayed?

Level interrupts should be taken care of without doing anything, by the
very nature of being a level signal.

Edge interrupts should be replayed using check_irq_resend() after
taking the right locks and making the interrupt pending. Or, if there
is a way for SW to make the interrupt pending at the TLMM level, to use
that as a way to reinject the interrupt (which would be the preferred
way, as it avoids all kind of ugly locking considerations).


Without deviation from the norm, progress is not possible.

 \ /
  Last update: 2018-08-08 08:27    [W:0.069 / U:98.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site