lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Revert "cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo"
From
Date
On 07/08/2018 00:11, Srinivas Pandruvada wrote:
> On Mon, 2018-08-06 at 23:50 +0200, Gabriele Mazzotta wrote:
>> On 06/08/2018 18:49, Srinivas Pandruvada wrote:
>>> On Mon, 2018-08-06 at 10:30 +0200, Rafael J. Wysocki wrote:
>>>> On Sat, Aug 4, 2018 at 7:31 PM, Gabriele Mazzotta
>>>> <gabriele.mzt@gmail.com> wrote:
>>>>> On 04/08/2018 17:29, Gabriele Mazzotta wrote:
>>>>>> This change does not take into account that some BIOSes
>>>>>> change
>>>>>> MSR_IA32_MISC_ENABLE_TURBO_DISABLE depending on the power
>>>>>> source.
>>>>>> If the turbo is disabled when the system boots,
>>>>>> policy.max_freq
>>>>>> is set to pstate.max_pstate. However, if the BIOS later
>>>>>> enables
>>>>>> the turbo, the CPU will never be able to run at
>>>>>> pstate.turbo_pstate.
>>>>>>
>>>>>> Since now intel_pstate_set_policy() does its calculations
>>>>>> using
>>>>>> pstate.max_freq and pstate.turbo_freq, we can always
>>>>>> calculate
>>>>>> cpuinfo.max_freq using pstate.turbo_pstate, thus allowing
>>>>>> system
>>>>>> with varying MSR_IA32_MISC_ENABLE_TURBO_DISABLE to run at
>>>>>> full
>>>>>> speed when the turbo is enabled.
>>>>
>>>> Well, the problem with this approach is that always using
>>>> pstate.turbo_pstate as the max causes the governor to
>>>> overestimate
>>>> the
>>>> target frequency when the turbo range is not available (the
>>>> target
>>>> depends on the width of the entire available P-state range
>>>> including
>>>> turbo, so if the turbo range is not available, the number take
>>>> into
>>>> that computation is too large).
>>>>
>>>> Are we expected to get notified when the BIOS updates
>>>> MSR_IA32_MISC_ENABLE_TURBO_DISABLE?
>>>
>>> Let's try this:
>>> - boot with kernel command line
>>>
>>> intel_pstate=support_acpi_ppc dyndbg="file processor_perflib.c +p"
>>> dyndbg="file intel_pstate.c +p"
>>
> Interesting output.
> Can you run ?
> # turbostat --debug
> in both plugged and unplugged state.

This is the output of turbostat while plugged in, with
intel_pstate=support_acpi_ppc in the cmdline:

turbostat version 18.06.20 - Len Brown <lenb@kernel.org>
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:45:1 (6:69:1)
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB
cpu0: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
CPUID(7): No-SGX
cpu0: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 17476 sec. Joule Counter Range, at 15 Watts
cpu0: MSR_PLATFORM_INFO: 0x8083df3011800
8 * 100.0 = 800.0 MHz max efficiency frequency
24 * 100.0 = 2400.0 MHz base frequency
cpu0: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
cpu0: MSR_TURBO_RATIO_LIMIT: 0x1b1b1b1e
27 * 100.0 = 2700.0 MHz max turbo 4 active cores
27 * 100.0 = 2700.0 MHz max turbo 3 active cores
27 * 100.0 = 2700.0 MHz max turbo 2 active cores
30 * 100.0 = 3000.0 MHz max turbo 1 active cores
cpu0: MSR_CONFIG_TDP_NOMINAL: 0x00000012 (base_ratio=18)
cpu0: MSR_CONFIG_TDP_LEVEL_1: 0x0008005c (PKG_MIN_PWR_LVL1=0 PKG_MAX_PWR_LVL1=0 LVL1_RATIO=8 PKG_TDP_LVL1=92)
cpu0: MSR_CONFIG_TDP_LEVEL_2: 0x001800c8 (PKG_MIN_PWR_LVL2=0 PKG_MAX_PWR_LVL2=0 LVL2_RATIO=24 PKG_TDP_LVL2=200)
cpu0: MSR_CONFIG_TDP_CONTROL: 0x00000000 ( lock=0)
cpu0: MSR_TURBO_ACTIVATION_RATIO: 0x00000011 (MAX_NON_TURBO_RATIO=17 lock=0)
cpu0: MSR_PKG_CST_CONFIG_CONTROL: 0x1e008407 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked, pkg-cstate-limit=7 (pc9))
cpu0: POLL: CPUIDLE CORE POLL IDLE
cpu0: C1: MWAIT 0x00
cpu0: C1E: MWAIT 0x01
cpu0: C3: MWAIT 0x10
cpu0: C6: MWAIT 0x20
cpu0: C7s: MWAIT 0x32
cpu0: C8: MWAIT 0x40
cpu0: C9: MWAIT 0x50
cpu0: C10: MWAIT 0x60
cpu0: cpufreq driver: intel_pstate
cpu0: cpufreq governor: powersave
cpufreq intel_pstate no_turbo: 0
cpu0: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x1d210020 (Active: Auto-HWP, ) (Logged: MultiCoreTurbo, PkgPwrL2, PkgPwrL1, Amps, Auto-HWP, PROCHOT, )
cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x1c010000 (Active: ) (Logged: PROCHOT, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d010000 (Active: ) (Logged: PROCHOT, Amps, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
cpu0: MSR_PKG_POWER_INFO: 0x00000078 (15 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
cpu0: MSR_PKG_POWER_LIMIT: 0x420078001480c8 (UNlocked)
cpu0: PKG Limit #1: ENabled (25.000000 Watts, 1.000000 sec, clamp DISabled)
cpu0: PKG Limit #2: DISabled (15.000000 Watts, 0.002441* sec, clamp DISabled)
cpu0: MSR_PP0_POLICY: 0
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00640000 (100 C)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x882d0808 (55 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
cpu0: MSR_IA32_THERM_STATUS: 0x882d0808 (55 C +/- 1)
cpu0: MSR_IA32_THERM_INTERRUPT: 0x00000013 (100 C, 100 C)
cpu2: MSR_IA32_THERM_STATUS: 0x88300808 (52 C +/- 1)
cpu2: MSR_IA32_THERM_INTERRUPT: 0x00000013 (100 C, 100 C)
cpu0: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns)
cpu0: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns)
cpu0: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns)
cpu0: MSR_PKGC8_IRTL: 0x000088e4 (valid, 233472 ns)
cpu0: MSR_PKGC9_IRTL: 0x00008945 (valid, 332800 ns)
cpu0: MSR_PKGC10_IRTL: 0x00009003 (valid, 3 ns)


And this is what I get after I unplug the laptop:

turbostat version 18.06.20 - Len Brown <lenb@kernel.org>
CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:45:1 (6:69:1)
CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM
CPUID(6): APERF, No-TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB
cpu3: MSR_IA32_MISC_ENABLE: 0x4000850089 (TCC EIST MWAIT PREFETCH No-TURBO)
CPUID(7): No-SGX
cpu3: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB)
RAPL: 17476 sec. Joule Counter Range, at 15 Watts
cpu3: MSR_PLATFORM_INFO: 0x8083df3011800
8 * 100.0 = 800.0 MHz max efficiency frequency
24 * 100.0 = 2400.0 MHz base frequency
cpu3: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled)
cpu3: MSR_TURBO_RATIO_LIMIT: 0x1b1b1b1e
27 * 100.0 = 2700.0 MHz max turbo 4 active cores
27 * 100.0 = 2700.0 MHz max turbo 3 active cores
27 * 100.0 = 2700.0 MHz max turbo 2 active cores
30 * 100.0 = 3000.0 MHz max turbo 1 active cores
cpu3: MSR_CONFIG_TDP_NOMINAL: 0x00000012 (base_ratio=18)
cpu3: MSR_CONFIG_TDP_LEVEL_1: 0x0008005c (PKG_MIN_PWR_LVL1=0 PKG_MAX_PWR_LVL1=0 LVL1_RATIO=8 PKG_TDP_LVL1=92)
cpu3: MSR_CONFIG_TDP_LEVEL_2: 0x001800c8 (PKG_MIN_PWR_LVL2=0 PKG_MAX_PWR_LVL2=0 LVL2_RATIO=24 PKG_TDP_LVL2=200)
cpu3: MSR_CONFIG_TDP_CONTROL: 0x00000000 ( lock=0)
cpu3: MSR_TURBO_ACTIVATION_RATIO: 0x00000011 (MAX_NON_TURBO_RATIO=17 lock=0)
cpu3: MSR_PKG_CST_CONFIG_CONTROL: 0x1e008407 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, locked, pkg-cstate-limit=7 (pc9))
cpu3: POLL: CPUIDLE CORE POLL IDLE
cpu3: C1: MWAIT 0x00
cpu3: C1E: MWAIT 0x01
cpu3: C3: MWAIT 0x10
cpu3: C6: MWAIT 0x20
cpu3: C7s: MWAIT 0x32
cpu3: C8: MWAIT 0x40
cpu3: C9: MWAIT 0x50
cpu3: C10: MWAIT 0x60
cpu3: cpufreq driver: intel_pstate
cpu3: cpufreq governor: powersave
cpufreq intel_pstate no_turbo: 1
cpu3: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch)
cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced)
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x1d210000 (Active: ) (Logged: MultiCoreTurbo, PkgPwrL2, PkgPwrL1, Amps, Auto-HWP, PROCHOT, )
cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x1c010000 (Active: ) (Logged: PROCHOT, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d010000 (Active: ) (Logged: PROCHOT, Amps, PkgPwrL1, PkgPwrL2, )
cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.)
cpu0: MSR_PKG_POWER_INFO: 0x00000078 (15 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
cpu0: MSR_PKG_POWER_LIMIT: 0x420078001480c8 (UNlocked)
cpu0: PKG Limit #1: ENabled (25.000000 Watts, 1.000000 sec, clamp DISabled)
cpu0: PKG Limit #2: DISabled (15.000000 Watts, 0.002441* sec, clamp DISabled)
cpu0: MSR_PP0_POLICY: 0
cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_PP1_POLICY: 0
cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked)
cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled)
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00640000 (100 C)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x882f0808 (53 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
cpu0: MSR_IA32_THERM_STATUS: 0x882f0808 (53 C +/- 1)
cpu0: MSR_IA32_THERM_INTERRUPT: 0x00000013 (100 C, 100 C)
cpu2: MSR_IA32_THERM_STATUS: 0x88300808 (52 C +/- 1)
cpu2: MSR_IA32_THERM_INTERRUPT: 0x00000013 (100 C, 100 C)
cpu3: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns)
cpu3: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns)
cpu3: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns)
cpu3: MSR_PKGC8_IRTL: 0x000088e4 (valid, 233472 ns)
cpu3: MSR_PKGC9_IRTL: 0x00008945 (valid, 332800 ns)
cpu3: MSR_PKGC10_IRTL: 0x00009003 (valid, 3 ns)


MSR_CORE_PERF_LIMIT_REASONS seems to have a different value
when plugged in depending on how the laptop booted. I don't
know if this is relevant, but this is what I noticed.

Right after a reboot while plugged in, I get:
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x1d201000 (Active: MultiCoreTurbo, ) (Logged: MultiCoreTurbo, PkgPwrL2, PkgPwrL1, Amps, Auto-HWP, )
If unplug and replug, I get:
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x1d210020 (Active: Auto-HWP, ) (Logged: MultiCoreTurbo, PkgPwrL2, PkgPwrL1, Amps, Auto-HWP, PROCHOT, )

If the laptop booted while unplgged, I constantly get:
cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x14000000 (Active: ) (Logged: MultiCoreTurbo, PkgPwrL1, )


> Also output of acpidump?

You can find it here:
https://bugzilla.kernel.org/attachment.cgi?id=178381

>
>> Plugged -> Unplugged:
>>
>> [ 40.046116] CPU 0: _PPC is 6 - frequency limited
>> [ 40.046128] intel_pstate: policy->max > max non turbo frequency
>> [ 40.046131] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 3000000
>> [ 40.046134] intel_pstate: cpu:0 max_state 30 min_policy_perf:8
>> max_policy_perf:30
>> [ 40.046137] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 40.046140] intel_pstate: cpu:0 max_perf_ratio:30 min_perf_ratio:8
>> [ 40.162173] CPU 0: _PPC is 6 - frequency limited
>> [ 40.162186] intel_pstate: policy->max > max non turbo frequency
>> [ 40.162190] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 3000000
>> [ 40.162194] intel_pstate: cpu:0 max_state 30 min_policy_perf:8
>> max_policy_perf:30
>> [ 40.162197] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 40.162200] intel_pstate: cpu:0 max_perf_ratio:30 min_perf_ratio:8
>> [ 40.162215] CPU 0: _PPC is 6 - frequency limited
>> [ 40.162220] intel_pstate: policy->max > max non turbo frequency
>> [ 40.162223] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 3000000
>> [ 40.162226] intel_pstate: cpu:0 max_state 30 min_policy_perf:8
>> max_policy_perf:30
>> [ 40.162228] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 40.162230] intel_pstate: cpu:0 max_perf_ratio:30 min_perf_ratio:8
>> [ 40.162237] CPU 0: _PPC is 6 - frequency limited
>> [ 40.162241] intel_pstate: policy->max > max non turbo frequency
>> [ 40.162243] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 3000000
>> [ 40.162245] intel_pstate: cpu:0 max_state 30 min_policy_perf:8
>> max_policy_perf:30
>> [ 40.162247] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 40.162249] intel_pstate: cpu:0 max_perf_ratio:30 min_perf_ratio:8
>> [ 40.162257] CPU 0: _PPC is 6 - frequency limited
>> [ 40.162261] intel_pstate: policy->max > max non turbo frequency
>> [ 40.162263] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 3000000
>> [ 40.162265] intel_pstate: cpu:0 max_state 30 min_policy_perf:8
>> max_policy_perf:30
>> [ 40.162267] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 40.162269] intel_pstate: cpu:0 max_perf_ratio:30 min_perf_ratio:8
>>
>> Unplugged -> Plugged:
>>
>> [ 52.648535] CPU 0: _PPC is 6 - frequency limited
>> [ 52.648553] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 1700000
>> [ 52.648558] intel_pstate: cpu:0 max_state 17 min_policy_perf:8
>> max_policy_perf:17
>> [ 52.648562] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 52.648566] intel_pstate: cpu:0 max_perf_ratio:17 min_perf_ratio:8
>> [ 52.648583] CPU 0: _PPC is 6 - frequency limited
>> [ 52.648590] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 1700000
>> [ 52.648595] intel_pstate: cpu:0 max_state 17 min_policy_perf:8
>> max_policy_perf:17
>> [ 52.648598] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 52.648602] intel_pstate: cpu:0 max_perf_ratio:17 min_perf_ratio:8
>> [ 52.656093] CPU 0: _PPC is 6 - frequency limited
>> [ 52.656111] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 1700000
>> [ 52.656116] intel_pstate: cpu:0 max_state 17 min_policy_perf:8
>> max_policy_perf:17
>> [ 52.656120] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 52.656123] intel_pstate: cpu:0 max_perf_ratio:17 min_perf_ratio:8
>> [ 52.775577] CPU 0: _PPC is 6 - frequency limited
>> [ 52.775594] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 1700000
>> [ 52.775598] intel_pstate: cpu:0 max_state 17 min_policy_perf:8
>> max_policy_perf:17
>> [ 52.775601] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 52.775604] intel_pstate: cpu:0 max_perf_ratio:17 min_perf_ratio:8
>> [ 53.028620] CPU 0: _PPC is 6 - frequency limited
>> [ 53.028637] intel_pstate: set_policy cpuinfo.max 3000000 policy-
>>> max 1700000
>> [ 53.028643] intel_pstate: cpu:0 max_state 17 min_policy_perf:8
>> max_policy_perf:17
>> [ 53.028647] intel_pstate: cpu:0 global_min:8 global_max:30
>> [ 53.028651] intel_pstate: cpu:0 max_perf_ratio:17 min_perf_ratio:8
>>
>>> and send dmesg after you change power sources.
>>>
>>> - Also try with
>>> intel_pstate=disable dyndbg="file processor_perflib.c +p"
>>
>> Nothing gets printed with this one.
>>
>> Thanks,
>> Gabriele
>>
>>> and send dmesg.
>>>
>>> Thanks,
>>> Srinivas
>>>
>>>

\
 
 \ /
  Last update: 2018-08-07 22:12    [W:0.097 / U:24.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site