lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/2] iommu/rockchip: Handle errors returned from PM framework
Date
Hi Marc,

Am Dienstag, 7. August 2018, 10:54:05 CEST schrieb Marc Zyngier:
> pm_runtime_get_if_in_use can fail: either PM has been disabled
> altogether (-EINVAL), or the device hasn't been enabled yet (0).
> Sadly, the Rockchip IOMMU driver tends to conflate the two things
> by considering a non-zero return value as successful.
>
> This has the consequence of hiding other bugs, so let's handle this
> case throughout the driver, with a WARN_ON_ONCE so that we can try
> and work out what happened.
>
> Fixes: 0f181d3cf7d98 ("iommu/rockchip: Add runtime PM support")
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

I'm still not sure about the !CONFIG_PM case, as it was probably silently
working in that case before.

But on the other hand we're also already running over it in other places
like in the iommu-shutdown and I guess if someone _really_ disabled
CONFIG_PM, a lot of additional stuff would fail anyway.


So should we wrap that in some #ifdef magic, just ignore it or simply
select PM similar to what Tegra, Renesas and Vexpress seem to do?

I guess I like the 3rd option best ;-)


Heiko



> drivers/iommu/rockchip-iommu.c | 21 +++++++++++++++------
> 1 file changed, 15 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
> index 054cd2c8e9c8..4e0f9b61cd7f 100644
> --- a/drivers/iommu/rockchip-iommu.c
> +++ b/drivers/iommu/rockchip-iommu.c
> @@ -521,10 +521,11 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
> u32 int_status;
> dma_addr_t iova;
> irqreturn_t ret = IRQ_NONE;
> - int i;
> + int i, err;
>
> - if (WARN_ON(!pm_runtime_get_if_in_use(iommu->dev)))
> - return 0;
> + err = pm_runtime_get_if_in_use(iommu->dev);
> + if (WARN_ON_ONCE(err <= 0))
> + return ret;
>
> if (WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks)))
> goto out;
> @@ -620,11 +621,15 @@ static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
> spin_lock_irqsave(&rk_domain->iommus_lock, flags);
> list_for_each(pos, &rk_domain->iommus) {
> struct rk_iommu *iommu;
> + int ret;
>
> iommu = list_entry(pos, struct rk_iommu, node);
>
> /* Only zap TLBs of IOMMUs that are powered on. */
> - if (pm_runtime_get_if_in_use(iommu->dev)) {
> + ret = pm_runtime_get_if_in_use(iommu->dev);
> + if (WARN_ON_ONCE(ret < 0))
> + continue;
> + if (ret) {
> WARN_ON(clk_bulk_enable(iommu->num_clocks,
> iommu->clocks));
> rk_iommu_zap_lines(iommu, iova, size);
> @@ -891,6 +896,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
> struct rk_iommu *iommu;
> struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
> unsigned long flags;
> + int ret;
>
> /* Allow 'virtual devices' (eg drm) to detach from domain */
> iommu = rk_iommu_from_dev(dev);
> @@ -909,7 +915,9 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
> list_del_init(&iommu->node);
> spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
>
> - if (pm_runtime_get_if_in_use(iommu->dev)) {
> + ret = pm_runtime_get_if_in_use(iommu->dev);
> + WARN_ON_ONCE(ret < 0);
> + if (ret > 0) {
> rk_iommu_disable(iommu);
> pm_runtime_put(iommu->dev);
> }
> @@ -946,7 +954,8 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
> list_add_tail(&iommu->node, &rk_domain->iommus);
> spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
>
> - if (!pm_runtime_get_if_in_use(iommu->dev))
> + ret = pm_runtime_get_if_in_use(iommu->dev);
> + if (!ret || WARN_ON_ONCE(ret < 0))
> return 0;
>
ret = rk_iommu_enable(iommu);
>




\
 
 \ /
  Last update: 2018-08-07 14:11    [W:0.059 / U:17.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site