lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 11/13] drm/mediatek: use layer_nr function to get layer number to init plane
From
Date
Hi,CK:

On Tue, 2018-08-07 at 12:32 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Mon, 2018-08-06 at 19:58 +0800, Stu Hsieh wrote:
> > This patch use layer_nr function to get layer number to init plane
> >
> > When plane init in crtc create,
> > it use the number of OVL layer to init plane.
> > That's OVL can read 4 memory address.
> >
> > For mt2712 third ddp, it use RDMA to read memory.
> > RDMA can read 1 memory address, so it just init one plane.
> >
> > For compatibility, this patch use mtk_ddp_comp_layer_nr function
> > to get layer number from their HW component in ddp for plane init.
> >
> > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 37 +++++++++++++++++++++------------
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 1 -
> > 2 files changed, 24 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > index 2d6aa150a9ff..1a8685fbbf57 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > @@ -45,7 +45,8 @@ struct mtk_drm_crtc {
> > bool pending_needs_vblank;
> > struct drm_pending_vblank_event *event;
> >
> > - struct drm_plane planes[OVL_LAYER_NR];
> > + struct drm_plane **planes;
>
> Why double pointer? This make things more complicated.
> Single pointer is equal to array, so you need not to modify so many
> place.
>
> Regards,
> CK
>
ok

Regards,
Stu

> > + unsigned int layer_nr;
> > bool pending_planes;
> >
> > void __iomem *config_regs;
> > @@ -286,8 +287,8 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
> > }
> >
> > /* Initially configure all planes */
> > - for (i = 0; i < OVL_LAYER_NR; i++) {
> > - struct drm_plane *plane = &mtk_crtc->planes[i];
> > + for (i = 0; i < mtk_crtc->layer_nr; i++) {
> > + struct drm_plane *plane = mtk_crtc->planes[i];
> > struct mtk_plane_state *plane_state;
> >
> > plane_state = to_mtk_plane_state(plane->state);
> > @@ -351,8 +352,8 @@ static void mtk_crtc_ddp_config(struct drm_crtc *crtc)
> > }
> >
> > if (mtk_crtc->pending_planes) {
> > - for (i = 0; i < OVL_LAYER_NR; i++) {
> > - struct drm_plane *plane = &mtk_crtc->planes[i];
> > + for (i = 0; i < mtk_crtc->layer_nr; i++) {
> > + struct drm_plane *plane = mtk_crtc->planes[i];
> > struct mtk_plane_state *plane_state;
> >
> > plane_state = to_mtk_plane_state(plane->state);
> > @@ -403,8 +404,8 @@ static void mtk_drm_crtc_atomic_disable(struct drm_crtc *crtc,
> > return;
> >
> > /* Set all pending plane state to disabled */
> > - for (i = 0; i < OVL_LAYER_NR; i++) {
> > - struct drm_plane *plane = &mtk_crtc->planes[i];
> > + for (i = 0; i < mtk_crtc->layer_nr; i++) {
> > + struct drm_plane *plane = mtk_crtc->planes[i];
> > struct mtk_plane_state *plane_state;
> >
> > plane_state = to_mtk_plane_state(plane->state);
> > @@ -450,8 +451,8 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
> >
> > if (mtk_crtc->event)
> > mtk_crtc->pending_needs_vblank = true;
> > - for (i = 0; i < OVL_LAYER_NR; i++) {
> > - struct drm_plane *plane = &mtk_crtc->planes[i];
> > + for (i = 0; i < mtk_crtc->layer_nr; i++) {
> > + struct drm_plane *plane = mtk_crtc->planes[i];
> > struct mtk_plane_state *plane_state;
> >
> > plane_state = to_mtk_plane_state(plane->state);
> > @@ -598,18 +599,28 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
> > mtk_crtc->ddp_comp[i] = comp;
> > }
> >
> > - for (zpos = 0; zpos < OVL_LAYER_NR; zpos++) {
> > + mtk_crtc->layer_nr = mtk_ddp_comp_layer_nr(mtk_crtc->ddp_comp[0]);
> > + mtk_crtc->planes = devm_kmalloc_array(dev, mtk_crtc->layer_nr,
> > + sizeof(*mtk_crtc->planes),
> > + GFP_KERNEL);
> > +
> > + for (zpos = 0; zpos < mtk_crtc->layer_nr; zpos++) {
> > + mtk_crtc->planes[zpos] = devm_kzalloc(dev,
> > + sizeof(*mtk_crtc->planes[zpos]),
> > + GFP_KERNEL);
> > +
> > type = (zpos == 0) ? DRM_PLANE_TYPE_PRIMARY :
> > (zpos == 1) ? DRM_PLANE_TYPE_CURSOR :
> > DRM_PLANE_TYPE_OVERLAY;
> > - ret = mtk_plane_init(drm_dev, &mtk_crtc->planes[zpos],
> > + ret = mtk_plane_init(drm_dev, mtk_crtc->planes[zpos],
> > BIT(pipe), type);
> > if (ret)
> > goto unprepare;
> > }
> >
> > - ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
> > - &mtk_crtc->planes[1], pipe);
> > + ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, mtk_crtc->planes[0],
> > + mtk_crtc->layer_nr > 1 ? mtk_crtc->planes[1] :
> > + NULL, pipe);
> > if (ret < 0)
> > goto unprepare;
> > drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > index 9d9410c67ae9..60bcc8aba8e3 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > @@ -18,7 +18,6 @@
> > #include "mtk_drm_ddp_comp.h"
> > #include "mtk_drm_plane.h"
> >
> > -#define OVL_LAYER_NR 4
> > #define MTK_LUT_SIZE 512
> > #define MTK_MAX_BPC 10
> > #define MTK_MIN_BPC 3
>
>


\
 
 \ /
  Last update: 2018-08-07 11:52    [W:0.045 / U:25.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site