lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 02/18] clk: intel: Add clock driver for Intel MIPS SoCs
Date
Quoting Zhu, Yi Xin (2018-08-29 03:34:26)
> >>>> +}
> >>>> +
> >>>> +CLK_OF_DECLARE(intel_grx500_cgu, "intel,grx500-cgu", grx500_clk_init);
> >>> Any reason a platform driver can't be used instead of CLK_OF_DECLARE()?
> >> It provides CPU clock which is used in early boot stage.
> >>
> > Ok. What is the CPU clock doing in early boot stage? Some sort of timer
> > frequency? If the driver can be split into two pieces, one to handle the
> > really early stuff that must be in place to get timers up and running
> > and the other to register the rest of the clks that aren't critical from
> > a regular platform driver it would be good. That's preferred model if
> > something is super critical.
> >
> Just to make sure my approach is same as you think.
>
> In the driver, there's two clock registrations.
>
> - One through CLK_OF_DECLARE for early stage clocks.
>
> - The other via platform driver for the non-critical clocks.

You can use the same DT node for both parts, no need to split the node
into two and use syscon here.

\
 
 \ /
  Last update: 2018-08-31 19:15    [W:0.092 / U:29.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site