lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 02/10] net: mvpp2: phylink support
On Fri, Aug 31, 2018 at 03:36:51PM +0200, Antoine Tenart wrote:
> With the above code remove one case did not worked anymore: when the
> port is configured as a fixed-link because the SFP cage can't be
> described and used (on the 7040-db and 8040-db boards). In such cases
> phylink is called, mac_config() is called, but link_up() is never
> called. I'm not sure this is actually an issue in phylink, but the PPv2
> driver should probably take care of this weird case itself (by calling
> explicitly link_up()). What do you think?

Fixed link should work:

- when a fixed link is configured, link_config.link is set true.
- when phylink_start() is called, mac_config() will be called to do the
initial setup, and a resolve is triggered.
- phylink_resolve() will read the fixed link state, which in the case
of no GPIO, will inherit link_config.link.
- you will then see another mac_config() call.

Now what happens depends whether you've set the netdev's carrier state
in the driver - if you haven't, the netdev's carrier state should be
off. Since the state mismatches the link_state.link (which will be
true), you will get a mac_link_up() call.

mvneta ensures this state by always calling netif_carrier_off() in
mvneta_open(), maybe that ought to be in phylink_start() as that's the
state that phylink expects when phylink_start() has been called. So,
maybe it's a phylink bug.

Can you see any down-sides to moving the netif_carrier_off() in
mvneta_open() to phylink_start() ?

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up

\
 
 \ /
  Last update: 2018-08-31 16:12    [W:0.148 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site