lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] spi: add flags for octal I/O data transfer
Date
Add flags for Octal I/O data transfer
Required for the SPI controller which can do data transfer (TX/RX)
on 8 data lines e.g. NXP FlexSPI controller.
SPI_TX_OCTAL: transmit with 8 wires
SPI_RX_OCTAL: receive with 8 wires

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
include/linux/spi/spi.h | 2 ++
1 file changed, 2 insertions(+)

diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 558aeed..180f277 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -164,6 +164,8 @@ struct spi_device {
#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
#define SPI_RX_DUAL 0x400 /* receive with 2 wires */
#define SPI_RX_QUAD 0x800 /* receive with 4 wires */
+#define SPI_TX_OCTAL 0x1000 /* transmit with 8 wires */
+#define SPI_RX_OCTAL 0x2000 /* receive with 8 wires */
int irq;
void *controller_state;
void *controller_data;
--
2.7.4
\
 
 \ /
  Last update: 2018-08-31 12:36    [W:0.091 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site