lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC LKMM 1/7] tools/memory-model: Add extra ordering for locks and remove it for ordinary release/acquire
On Wed, Aug 29, 2018 at 02:10:47PM -0700, Paul E. McKenney wrote:
> From: Alan Stern <stern@rowland.harvard.edu>
>
> More than one kernel developer has expressed the opinion that the LKMM
> should enforce ordering of writes by locking. In other words, given
> the following code:
>
> WRITE_ONCE(x, 1);
> spin_unlock(&s):
> spin_lock(&s);
> WRITE_ONCE(y, 1);
>
> the stores to x and y should be propagated in order to all other CPUs,
> even though those other CPUs might not access the lock s. In terms of
> the memory model, this means expanding the cumul-fence relation.
>
> Locks should also provide read-read (and read-write) ordering in a
> similar way. Given:
>
> READ_ONCE(x);
> spin_unlock(&s);
> spin_lock(&s);
> READ_ONCE(y); // or WRITE_ONCE(y, 1);
>
> the load of x should be executed before the load of (or store to) y.
> The LKMM already provides this ordering, but it provides it even in
> the case where the two accesses are separated by a release/acquire
> pair of fences rather than unlock/lock. This would prevent
> architectures from using weakly ordered implementations of release and
> acquire, which seems like an unnecessary restriction. The patch
> therefore removes the ordering requirement from the LKMM for that
> case.
>
> All the architectures supported by the Linux kernel (including RISC-V)
> do provide this ordering for locks, albeit for varying reasons.
> Therefore this patch changes the model in accordance with the
> developers' wishes.
>
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> Reviewed-by: Will Deacon <will.deacon@arm.com>
> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Round 2 ;-), I guess... Let me start from the uncontroversial points:

1) being able to use the LKMM to reason about generic locking code
is useful and desirable (paraphrasing Peter in [1]);

2) strengthening the ordering requirements of such code isn't going
to boost performance (that's "real maths").

This patch is taking (1) away from us and it is formalizing (2), with
almost _no_ reason (no reason at all, if we stick to the commit msg.).

In [2], Will wrote:

"[...] having them [the RMWs] closer to RCsc[/to the semantics of
locks] would make it easier to implement and reason about generic
locking implementations (i.e. reduce the number of special ordering
cases and/or magic barrier macros)"

"magic barrier macros" as in "mmh, if we accept this patch, we _should_
be auditing the various implementations/code to decide where to place a

smp_barrier_promote_ordinary_release_acquire_to_unlock_lock()" ;-)

or the like, and "special ordering cases" as in "arrgh, (otherwise) we
are forced to reason on a per-arch basis while looking at generic code".

(Remark: ordinary release/acquire are building blocks for code such as
qspinlock, (q)rwlock, mutex, rwsem, ... and what else??).

To avoid further repetition, I conclude by confirming all the concerns
and my assessment of this patch as pointed out in [3]; the subsequent
discussion, although not conclusive, presented several suggestions for
improvement (IMO).

Andrea

[1] http://lkml.kernel.org/r/20180712134821.GT2494@hirez.programming.kicks-ass.net
[2] http://lkml.kernel.org/r/20180713093524.GC32020@arm.com
[3] http://lkml.kernel.org/r/20180710093821.GA5414@andrea
http://lkml.kernel.org/r/20180711161717.GA14635@andrea


> ---
> .../Documentation/explanation.txt | 186 ++++++++++++++----
> tools/memory-model/linux-kernel.cat | 8 +-
> ...ISA2+pooncelock+pooncelock+pombonce.litmus | 7 +-
> 3 files changed, 150 insertions(+), 51 deletions(-)
>
> diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt
> index 0cbd1ef8f86d..35bff92cc773 100644
> --- a/tools/memory-model/Documentation/explanation.txt
> +++ b/tools/memory-model/Documentation/explanation.txt
> @@ -28,7 +28,8 @@ Explanation of the Linux-Kernel Memory Consistency Model
> 20. THE HAPPENS-BEFORE RELATION: hb
> 21. THE PROPAGATES-BEFORE RELATION: pb
> 22. RCU RELATIONS: rcu-link, gp, rscs, rcu-fence, and rb
> - 23. ODDS AND ENDS
> + 23. LOCKING
> + 24. ODDS AND ENDS
>
>
>
> @@ -1067,28 +1068,6 @@ allowing out-of-order writes like this to occur. The model avoided
> violating the write-write coherence rule by requiring the CPU not to
> send the W write to the memory subsystem at all!)
>
> -There is one last example of preserved program order in the LKMM: when
> -a load-acquire reads from an earlier store-release. For example:
> -
> - smp_store_release(&x, 123);
> - r1 = smp_load_acquire(&x);
> -
> -If the smp_load_acquire() ends up obtaining the 123 value that was
> -stored by the smp_store_release(), the LKMM says that the load must be
> -executed after the store; the store cannot be forwarded to the load.
> -This requirement does not arise from the operational model, but it
> -yields correct predictions on all architectures supported by the Linux
> -kernel, although for differing reasons.
> -
> -On some architectures, including x86 and ARMv8, it is true that the
> -store cannot be forwarded to the load. On others, including PowerPC
> -and ARMv7, smp_store_release() generates object code that starts with
> -a fence and smp_load_acquire() generates object code that ends with a
> -fence. The upshot is that even though the store may be forwarded to
> -the load, it is still true that any instruction preceding the store
> -will be executed before the load or any following instructions, and
> -the store will be executed before any instruction following the load.
> -
>
> AND THEN THERE WAS ALPHA
> ------------------------
> @@ -1766,6 +1745,147 @@ before it does, and the critical section in P2 both starts after P1's
> grace period does and ends after it does.
>
>
> +LOCKING
> +-------
> +
> +The LKMM includes locking. In fact, there is special code for locking
> +in the formal model, added in order to make tools run faster.
> +However, this special code is intended to be more or less equivalent
> +to concepts we have already covered. A spinlock_t variable is treated
> +the same as an int, and spin_lock(&s) is treated almost the same as:
> +
> + while (cmpxchg_acquire(&s, 0, 1) != 0)
> + cpu_relax();
> +
> +This waits until s is equal to 0 and then atomically sets it to 1,
> +and the read part of the cmpxchg operation acts as an acquire fence.
> +An alternate way to express the same thing would be:
> +
> + r = xchg_acquire(&s, 1);
> +
> +along with a requirement that at the end, r = 0. Similarly,
> +spin_trylock(&s) is treated almost the same as:
> +
> + return !cmpxchg_acquire(&s, 0, 1);
> +
> +which atomically sets s to 1 if it is currently equal to 0 and returns
> +true if it succeeds (the read part of the cmpxchg operation acts as an
> +acquire fence only if the operation is successful). spin_unlock(&s)
> +is treated almost the same as:
> +
> + smp_store_release(&s, 0);
> +
> +The "almost" qualifiers above need some explanation. In the LKMM, the
> +store-release in a spin_unlock() and the load-acquire which forms the
> +first half of the atomic rmw update in a spin_lock() or a successful
> +spin_trylock() -- we can call these things lock-releases and
> +lock-acquires -- have two properties beyond those of ordinary releases
> +and acquires.
> +
> +First, when a lock-acquire reads from a lock-release, the LKMM
> +requires that every instruction po-before the lock-release must
> +execute before any instruction po-after the lock-acquire. This would
> +naturally hold if the release and acquire operations were on different
> +CPUs, but the LKMM says it holds even when they are on the same CPU.
> +For example:
> +
> + int x, y;
> + spinlock_t s;
> +
> + P0()
> + {
> + int r1, r2;
> +
> + spin_lock(&s);
> + r1 = READ_ONCE(x);
> + spin_unlock(&s);
> + spin_lock(&s);
> + r2 = READ_ONCE(y);
> + spin_unlock(&s);
> + }
> +
> + P1()
> + {
> + WRITE_ONCE(y, 1);
> + smp_wmb();
> + WRITE_ONCE(x, 1);
> + }
> +
> +Here the second spin_lock() reads from the first spin_unlock(), and
> +therefore the load of x must execute before the load of y. Thus we
> +cannot have r1 = 1 and r2 = 0 at the end (this is an instance of the
> +MP pattern).
> +
> +This requirement does not apply to ordinary release and acquire
> +fences, only to lock-related operations. For instance, suppose P0()
> +in the example had been written as:
> +
> + P0()
> + {
> + int r1, r2, r3;
> +
> + r1 = READ_ONCE(x);
> + smp_store_release(&s, 1);
> + r3 = smp_load_acquire(&s);
> + r2 = READ_ONCE(y);
> + }
> +
> +Then the CPU would be allowed to forward the s = 1 value from the
> +smp_store_release() to the smp_load_acquire(), executing the
> +instructions in the following order:
> +
> + r3 = smp_load_acquire(&s); // Obtains r3 = 1
> + r2 = READ_ONCE(y);
> + r1 = READ_ONCE(x);
> + smp_store_release(&s, 1); // Value is forwarded
> +
> +and thus it could load y before x, obtaining r2 = 0 and r1 = 1.
> +
> +Second, when a lock-acquire reads from a lock-release, and some other
> +stores W and W' occur po-before the lock-release and po-after the
> +lock-acquire respectively, the LKMM requires that W must propagate to
> +each CPU before W' does. For example, consider:
> +
> + int x, y;
> + spinlock_t x;
> +
> + P0()
> + {
> + spin_lock(&s);
> + WRITE_ONCE(x, 1);
> + spin_unlock(&s);
> + }
> +
> + P1()
> + {
> + int r1;
> +
> + spin_lock(&s);
> + r1 = READ_ONCE(x);
> + WRITE_ONCE(y, 1);
> + spin_unlock(&s);
> + }
> +
> + P2()
> + {
> + int r2, r3;
> +
> + r2 = READ_ONCE(y);
> + smp_rmb();
> + r3 = READ_ONCE(x);
> + }
> +
> +If r1 = 1 at the end then the spin_lock() in P1 must have read from
> +the spin_unlock() in P0. Hence the store to x must propagate to P2
> +before the store to y does, so we cannot have r2 = 1 and r3 = 0.
> +
> +These two special requirements for lock-release and lock-acquire do
> +not arise from the operational model. Nevertheless, kernel developers
> +have come to expect and rely on them because they do hold on all
> +architectures supported by the Linux kernel, albeit for various
> +differing reasons.
> +
> +
> ODDS AND ENDS
> -------------
>
> @@ -1831,26 +1951,6 @@ they behave as follows:
> events and the events preceding them against all po-later
> events.
>
> -The LKMM includes locking. In fact, there is special code for locking
> -in the formal model, added in order to make tools run faster.
> -However, this special code is intended to be exactly equivalent to
> -concepts we have already covered. A spinlock_t variable is treated
> -the same as an int, and spin_lock(&s) is treated the same as:
> -
> - while (cmpxchg_acquire(&s, 0, 1) != 0)
> - cpu_relax();
> -
> -which waits until s is equal to 0 and then atomically sets it to 1,
> -and where the read part of the atomic update is also an acquire fence.
> -An alternate way to express the same thing would be:
> -
> - r = xchg_acquire(&s, 1);
> -
> -along with a requirement that at the end, r = 0. spin_unlock(&s) is
> -treated the same as:
> -
> - smp_store_release(&s, 0);
> -
> Interestingly, RCU and locking each introduce the possibility of
> deadlock. When faced with code sequences such as:
>
> diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat
> index 59b5cbe6b624..882fc33274ac 100644
> --- a/tools/memory-model/linux-kernel.cat
> +++ b/tools/memory-model/linux-kernel.cat
> @@ -38,7 +38,7 @@ let strong-fence = mb | gp
> (* Release Acquire *)
> let acq-po = [Acquire] ; po ; [M]
> let po-rel = [M] ; po ; [Release]
> -let rfi-rel-acq = [Release] ; rfi ; [Acquire]
> +let po-unlock-rf-lock-po = po ; [UL] ; rf ; [LKR] ; po
>
> (**********************************)
> (* Fundamental coherence ordering *)
> @@ -60,13 +60,13 @@ let dep = addr | data
> let rwdep = (dep | ctrl) ; [W]
> let overwrite = co | fr
> let to-w = rwdep | (overwrite & int)
> -let to-r = addr | (dep ; rfi) | rfi-rel-acq
> +let to-r = addr | (dep ; rfi)
> let fence = strong-fence | wmb | po-rel | rmb | acq-po
> -let ppo = to-r | to-w | fence
> +let ppo = to-r | to-w | fence | (po-unlock-rf-lock-po & int)
>
> (* Propagation: Ordering from release operations and strong fences. *)
> let A-cumul(r) = rfe? ; r
> -let cumul-fence = A-cumul(strong-fence | po-rel) | wmb
> +let cumul-fence = A-cumul(strong-fence | po-rel) | wmb | po-unlock-rf-lock-po
> let prop = (overwrite & ext)? ; cumul-fence* ; rfe?
>
> (*
> diff --git a/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus b/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
> index 0f749e419b34..094d58df7789 100644
> --- a/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
> +++ b/tools/memory-model/litmus-tests/ISA2+pooncelock+pooncelock+pombonce.litmus
> @@ -1,11 +1,10 @@
> C ISA2+pooncelock+pooncelock+pombonce
>
> (*
> - * Result: Sometimes
> + * Result: Never
> *
> - * This test shows that the ordering provided by a lock-protected S
> - * litmus test (P0() and P1()) are not visible to external process P2().
> - * This is likely to change soon.
> + * This test shows that write-write ordering provided by locks
> + * (in P0() and P1()) is visible to external process P2().
> *)
>
> {}
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-08-30 14:51    [W:0.229 / U:57.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site