lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 4/8] interconnect: qcom: Add RPM communication
On Tue, Jul 31, 2018 at 9:13 AM Georgi Djakov <georgi.djakov@linaro.org> wrote:
>
> On some Qualcomm SoCs, there is a remote processor, which controls some of
> the Network-On-Chip interconnect resources. Other CPUs express their needs
> by communicating with this processor. Add a driver to handle communication
> with this remote processor.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
> .../bindings/interconnect/qcom-smd.txt | 32 +++++++
> drivers/interconnect/qcom/Kconfig | 14 +++
> drivers/interconnect/qcom/Makefile | 2 +
> drivers/interconnect/qcom/smd-rpm.c | 91 +++++++++++++++++++
> drivers/interconnect/qcom/smd-rpm.h | 16 ++++
> 5 files changed, 155 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> create mode 100644 drivers/interconnect/qcom/Kconfig
> create mode 100644 drivers/interconnect/qcom/Makefile
> create mode 100644 drivers/interconnect/qcom/smd-rpm.c
> create mode 100644 drivers/interconnect/qcom/smd-rpm.h
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom-smd.txt b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> new file mode 100644
> index 000000000000..88a5aeb50935
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
> @@ -0,0 +1,32 @@
> +Qualcomm SMD-RPM interconnect driver binding
> +------------------------------------------------
> +The RPM (Resource Power Manager) is a dedicated hardware engine
> +for managing the shared SoC resources in order to keep the lowest
> +power profile. It communicates with other hardware subsystems via
> +the shared memory driver (SMD) back-end and accepts requests for
> +various resources.
> +
> +Required properties :
> +- compatible : shall contain only one of the following:
> + "qcom,interconnect-smd-rpm"
> +
> +Example:
> + smd {
> + compatible = "qcom,smd";
> +
> + rpm {
> + interrupts = <0 168 1>;

It would be nice if this interrupt example were more proper, somethine
like <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>. Other than that:

Reviewed-by: Evan Green <evgreen@chromium.org>

\
 
 \ /
  Last update: 2018-08-04 01:08    [W:0.108 / U:5.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site