lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v7 2/2] cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
Hi Taniya,

On Tue, Jul 24, 2018 at 3:44 AM Taniya Das <tdas@codeaurora.org> wrote:
>
> The CPUfreq HW present in some QCOM chipsets offloads the steps necessary
> for changing the frequency of CPUs. The driver implements the cpufreq
> driver interface for this hardware engine.
>
> Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> drivers/cpufreq/Kconfig.arm | 11 ++
> drivers/cpufreq/Makefile | 1 +
> drivers/cpufreq/qcom-cpufreq-hw.c | 348 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 360 insertions(+)
> create mode 100644 drivers/cpufreq/qcom-cpufreq-hw.c
>
...
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> new file mode 100644
> index 0000000..ea8f7d1
> --- /dev/null
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
...
> +static int qcom_cpufreq_hw_read_lut(struct platform_device *pdev,
> + struct cpufreq_qcom *c)
> +{
> + struct device *dev = &pdev->dev;
> + void __iomem *base;
> + u32 data, src, lval, i, core_count, prev_cc, prev_freq, cur_freq;
> +
> + c->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> + sizeof(*c->table), GFP_KERNEL);
> + if (!c->table)
> + return -ENOMEM;
> +
> + base = c->reg_bases[REG_LUT_TABLE];
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + data = readl_relaxed(base + i * LUT_ROW_SIZE);
> + src = (data & GENMASK(31, 30)) >> 30;
> + lval = data & GENMASK(7, 0);
> + core_count = CORE_COUNT_VAL(data);
> +
> + if (src)
> + c->table[i].frequency = c->xo_rate * lval / 1000;
> + else
> + c->table[i].frequency = INIT_RATE / 1000;

I don't know much about how this hardware works, but based on the
mask, src has 4 possible values. So does 0 mean INIT_RATE, and 1, 2,
and 3 all mean xo_rate?

Also, is INIT_RATE really constant? It sounds like gpll0 (or
gpll0_out_even?). You're already getting the xo clock, why not get
gpll0's real rate as well?

\
 
 \ /
  Last update: 2018-08-03 21:41    [W:0.168 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site