lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v15 0/7] Enable Bluetooth functionality for WCN3990
Hi Marcel,

On 2018-08-03 18:16, Marcel Holtmann wrote:
> Hi Balakrishna,
>
>> These patches enables Bluetooth functinalties for new Qualcomm
>> Bluetooth chip wnc3990. As this is latest chip with new features,
>> along with some common features to old chip "qcom,qca6174-bt".
>> we have updated names of functions that are used for both the chips
>> to keep this generic and would help in future when we would have new
>> BT SoC.
>>
>> The below are difference between new and old chips.
>>
>> *Power:
>> *New chip: we use voltage regulators to turn on/off the chip and we
>> must send a command on Tx line to turn on/off the chip completely.
>> *Old chip: We turn on/off by setting a GPIO.
>>
>> *Note: Turning on sequence differs between two chips.
>>
>> *Firmware download:
>> Only firmware file name differ from New and Old chip.
>>
>> So we reused some functions/structure/variables which are used for
>> old
>> chip to New chip by generic naming (may be future chips may use same
>> functions).
>>
>> * As we have multiple changes for functions names,we have tested these
>> patches
>> on both chips.
>>
>> v15:
>> * fixed nit issue in hci_qca.
>>
>> v13:
>> * Segregated optional and required properties for wcn3990.
>>
>> v12:
>> * removed iteration loop in qca_init_wcn3990
>> * updated review comments.
>>
>> v11:
>> * removed regulator current from dtbindings
>> * addressed review comments.
>>
>> v10:
>> * update current load with actual values of WCN3990.
>> * added support for itterative connect with BT chip if it fails to
>> respond to the HOST.
>> * Added regulator current dtbindings.
>> * addressed review comments.
>>
>> v9:
>> * removed smps regs.
>> * hidded flow control in respective functions.
>> * moved qca_soc_ver to qca_setup
>> * addressed review comments.
>>
>> v8:
>> * Squashed [v7 2/8] and [v7 3/8] to one patch.
>> * updated functions to set and get the UART speeds.
>> * addressed review comments.
>>
>> v7:
>> * Renamed all the possible function of ROME to generic.
>> * updated with review comments for hci_qca and btqca
>> * fixed kbuild errors.
>> * created wrapper functions for re-usable blocks.
>>
>> v6:
>> * Hooked up qca_power to qca_serdev.
>> * renamed all the naming inconsistency functions with qca_*
>> * leveraged common code of ROME for wcn3990.
>> * created wrapper functions for re-usable blocks.
>> * updated function of _*regulator_enable and _*regualtor_disable.
>> * removed redundant comments and functions.
>> * add code to derive the firmware files based on ROM Version.
>> * created new patch for common function of ROME and wcn3990.
>> * enables Qualcomm chip to operate at 3.2Mbps.
>> * updated names of functions that are used for both the chips to keep
>> this generic.
>>
>> v5:
>> * updated with review comments for hci_qca and btqca
>>
>> v4:
>> * rebased all changes on top of bluetooth-next.
>> * addressed review comments.
>> * New patch created for firmware download.
>>
>> v3:
>> * Rebased all changes on top of bluetooth-next.
>> * dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
>> wcn3990
>> - added dt-binding snippet for bluetooth chip wcn3990.
>> * Bluetooth: Add support for wcn3990 soc.
>> - updated BT_INFO with bt_dev_info, where ever necessary.
>>
>> v2:
>> * Add support for wcn3990:
>> These changes are aligned as per serdev frame work.
>> We implemented these changes on top of
>> https://patchwork.kernel.org/patch/10316093/
>> As this patch enable serdev for one of the Qualcomm BT chip.
>>
>> The changes in the patch include.
>> - Adding support to voting up/down regulators for WCN3990.
>> - Bluetooth firmware download for wcn3990.
>>
>> * Add device tree bindings for Atheros chips:
>> These changes are on top of
>> https://patchwork.kernel.org/patch/10316097/.
>> - Description of device tree bindings.
>>
>> Balakrishna Godavarthi (7):
>> dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
>> wcn3990
>> Bluetooth: btqca: Rename ROME specific functions to generic functions
>> Bluetooth: btqca: Redefine qca_uart_setup() to generic function.
>> Bluetooth: hci_qca: Add wrapper functions for setting UART speed
>> Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.
>> Bluetooth: btqca: Add wcn3990 firmware download support.
>> Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990
>>
>> .../bindings/net/qualcomm-bluetooth.txt | 29 +-
>> drivers/bluetooth/btqca.c | 117 +++--
>> drivers/bluetooth/btqca.h | 22 +-
>> drivers/bluetooth/hci_qca.c | 486 +++++++++++++++---
>> 4 files changed, 539 insertions(+), 115 deletions(-)
>
> all 7 patches have been applied to bluetooth-next tree.
>
> If we need to fix things, we fix them with additional patches instead
> of respinning the series.
>
> Regards
>
> Marcel

Thanks for the update Marcel.

@Matthias, Thanks for reviewing patches.

--
Regards
Balakrishna.

\
 
 \ /
  Last update: 2018-08-03 15:50    [W:0.065 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site