lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/15] Add RDMA memory mode support for mediatek SOC MT2712
Date
This patch series add RDMA memory mode support for mediatek SOC MT2712.
MT2712 has three display data path, including three HW engine,
two OVL and one RDMA.

The RDMA used in third ddp and it need to be set memory mode,
then RDMA could read data from memory and output to panel.

Change in v2:
- Remove some modification about dummy buffer in patch
"drm/mediatek: add memory mode for RDMA":
Register setting about reset and MATRIX_INT_MTX_SEL_DEFAULT.
- Remove some patches about dummy buffer as folowing:
"drm/mediatek: add drm_device in RDMA for mamory mode to reaquest buffer"
"drm/mediatek: add dummy buffer for RDMA memory mode"
- Rename and modify the v1 patch
"drm/mediatek: add layer number condition for RDMA to control plane"
as following patches to get the layer number by module.
"drm/mediatek: add function to get layer number for component"
"drm/mediatek: add callback function to return OVL layer number"
"drm/mediatek: add callback function to return RDMA layer number"
"drm/mediatek: use layer_nr function to get layer number to init plane"
- Remove v1 patch
"drm/mediatek: fixed the error value for add DSI1 in mutex"
This patch would be send in the future.

Stu Hsieh (15):
drm/mediatek: add connection from RDMA0 to DPI1
drm/mediatek: add connection from RDMA0 to DSI1
drm/mediatek: add connection from RDMA1 to DSI0
drm/mediatek: add connection from RDMA2 to DSI0
drm/mediatek: add RDMA memory mode for crtc created
drm/mediatek: add memory mode for RDMA
drm/mediatek: add layer config to set RDMA for plane setting
drm/mediatek: add RGB color format support for RDMA
drm/mediatek: add YUYV/UYVY color format support for RDMA
drm/mediatek: add function to get layer number for component
drm/mediatek: add callback function to return OVL layer number
drm/mediatek: add callback function to return RDMA layer number
drm/mediatek: use layer_nr function to get layer number to init plane
drm/mediatek: update some variable name from ovl to comp
drm/mediatek: fix connection from RDMA2 to DSI1

drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 10 +++
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 99 ++++++++++++++++++++++++++++-
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 60 +++++++++++------
drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 4 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 18 +++++-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 8 +++
6 files changed, 174 insertions(+), 25 deletions(-)

--
2.12.5.2.gbdf23ab

\
 
 \ /
  Last update: 2018-08-03 05:12    [W:0.108 / U:4.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site