lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] remoteproc: qcom: Introduce Non-PAS ADSP PIL driver
From
Date
Hello Bjorn,


Can you please let us know the suggest the file name and review the patch.


On 7/9/2018 11:29 AM, Rohit Kumar wrote:
> Thanks Rob for reviewing.
>
>
> On 7/7/2018 2:02 AM, Rob Herring wrote:
>> On Fri, Jun 29, 2018 at 02:50:53PM +0530, Rohit kumar wrote:
>>> This adds APSS based ADSP PIL driver for QCOM SoCs.
>>> Added initial support for SDM845 with ADSP bootup and
>>> shutdown operation handled from Application Processor
>>> SubSystem(APSS).
>>>
>>> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
>>> ---
>>> Changes since v1:
>>> - Used APIs from qcom_q6v5.c
>>> - Use clock, reset and regmap driver APIs instead of
>>>    directly writing into the LPASS registers.
>>> - Created new file for non PAS ADSP PIL instead of extending
>>>    existing ADSP PIL driver.
>>> - cleanups as suggested by Bjorn and Rob.
>>>
>>>   .../bindings/remoteproc/qcom,non-pas-adsp.txt      | 138 +++++
>> This should be a separate patch.
>
> Ok. Will separate it in next spin.
>>> drivers/remoteproc/Kconfig                         |  18 +
>>>   drivers/remoteproc/Makefile                        |   1 +
>>>   drivers/remoteproc/qcom_nonpas_adsp_pil.c          | 667
>>> +++++++++++++++++++++
>>>   4 files changed, 824 insertions(+)
>>>   create mode 100644
>>> Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>>>   create mode 100644 drivers/remoteproc/qcom_nonpas_adsp_pil.c
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>>> b/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>>> new file mode 100644
>>> index 0000000..0581aaa
>>> --- /dev/null
>>> +++
>>> b/Documentation/devicetree/bindings/remoteproc/qcom,non-pas-adsp.txt
>>> @@ -0,0 +1,138 @@
>>> +Qualcomm Technology Inc. Non PAS ADSP Peripheral Image Loader
>>> +
>>> +This document defines the binding for a component that loads and
>>> boots firmware
>>> +on the Qualcomm Technology Inc. ADSP Hexagon core.
>>> +
>>> +- compatible:
>>> +    Usage: required
>>> +    Value type: <string>
>>> +    Definition: must be one of:
>>> +            "qcom,sdm845-apss-adsp-pil"
>> Didn't Bjorn say to drop the 'apss' part?
>
> Yes, he had asked to rename compatible string for  existing PIL driver
> as "qcom,platform-subsystem-pas"
> and non-pas pil driver as "qcom,platform-subsystem-pil". I wanted to
> get confirmation from Bjorn whether
> we should rename the filename too.
> @Bjorn, can you please suggest filename and compatible strings for the
> two drivers.
>>> +
>>> +- reg:
>>> +    Usage: required
>>> +    Value type: <prop-encoded-array>
>>> +    Definition: must specify the base address and size of the qdsp6ss
>>> +
>>> +- reg-names:
>>> +    Usage: required
>>> +    Value type: <stringlist>
>>> +    Definition: must be "qdsp6ss"
>>> +
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-remoteproc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> Thanks,
> Rohit
>

\
 
 \ /
  Last update: 2018-08-03 13:23    [W:0.039 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site