lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 0/8] backlight: qcom-wled: Support for QCOM wled driver
On Fri, Aug 03, 2018 at 12:49:34PM +0530, kgunda@codeaurora.org wrote:
> Hi Bjorn,
> Can you please help review this patch series ?
>
> Pavel, Rob, Daniel reviewed the series except the "auto string detection"
> patch.

I did take a glance at the last patch... but in the end decided to wait
for v5 to look in depth.


Daniel.


>
> Thanks,
> Kiran
>
> On 2018-07-09 15:52, Kiran Gunda wrote:
> > This patch series renames the pm8941-wled.c driver to qcom-wled.c to add
> > the support for multiple PMICs supported by qualcomm. This patch series
> > supports both PM8941 and PMI8998 WLED. The PMI8998 WLED has the support
> > to handle the OVP (over voltage protection) and the SC (short circuit
> > protection)
> > interrupts. It also has the auto string detection algorithm support to
> > configure the right strings if the user specified string configuration
> > is in-correct. These three features are added in this series for
> > PMI8998.
> >
> > changes from v1:
> > - Fixed the commit message for
> > - backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
> >
> > Changes from v2:
> > - Fixed bjorn and other reviewer's comments
> > - Seperated the device tree bindings
> > - Splitted out the WLED4 changes in seperate patch
> > - Merged OVP and auto string detection patch
> >
> > Changes from v3:
> > - Added Reviewed-by/Acked-by tags
> > - Fixed comments from Bjorn/Vinod/Rob
> > - Splitting the "backlight: qcom-wled: Add support for WLED4
> > peripheral" patch
> > to seperate the WLED3 specific restructure.
> >
> > Kiran Gunda (8):
> > backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
> > backlight: qcom-wled: restructure the qcom-wled bindings
> > backlight: qcom-wled: Add new properties for PMI8998
> > backlight: qcom-wled: Rename PM8941* to WLED3
> > backlight: qcom-wled: Restructure the driver for WLED3
> > backlight: qcom-wled: Add support for WLED4 peripheral
> > backlight: qcom-wled: add support for short circuit handling
> > backlight: qcom-wled: Add auto string detection logic
> >
> > .../bindings/leds/backlight/pm8941-wled.txt | 42 -
> > .../bindings/leds/backlight/qcom-wled.txt | 150 +++
> > drivers/video/backlight/Kconfig | 8 +-
> > drivers/video/backlight/Makefile | 2 +-
> > drivers/video/backlight/pm8941-wled.c | 432 -------
> > drivers/video/backlight/qcom-wled.c | 1298
> > ++++++++++++++++++++
> > 6 files changed, 1453 insertions(+), 479 deletions(-)
> > delete mode 100644
> > Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt
> > create mode 100644
> > Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> > delete mode 100644 drivers/video/backlight/pm8941-wled.c
> > create mode 100644 drivers/video/backlight/qcom-wled.c

\
 
 \ /
  Last update: 2018-08-03 09:46    [W:0.184 / U:4.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site