lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
Date
From: Rajesh Bhagat <rajesh.bhagat@freescale.com>

Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustment is required or
not

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
---
Change in v2:
Modified some word misspellings in commit information

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 7881e3d..ed3fa79 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -609,6 +609,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};

usb1: usb3@3000000 {
@@ -618,6 +619,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};

usb2: usb3@3100000 {
@@ -627,6 +629,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ configure-gfladj;
};

sata: sata@3200000 {
--
1.7.1
\
 
 \ /
  Last update: 2018-08-29 05:34    [W:0.065 / U:8.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site