Messages in this thread Patch in this message |  | | From | Julien Thierry <> | Subject | [PATCH v5 17/27] irqchip/gic-v3: Factor group0 detection into functions | Date | Tue, 28 Aug 2018 16:51:27 +0100 |
| |
The code to detect whether Linux has access to group0 interrupts can prove useful in other parts of the driver.
Provide a separate function to do this.
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> --- drivers/irqchip/irq-gic-v3.c | 55 +++++++++++++++++++++++++++++--------------- 1 file changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index d5912f1..fef6688 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -392,6 +392,39 @@ static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs } while (irqnr != ICC_IAR1_EL1_SPURIOUS); }
+static u32 gic_get_pribits(void) +{ + u32 pribits; + + pribits = gic_read_ctlr(); + pribits &= ICC_CTLR_EL1_PRI_BITS_MASK; + pribits >>= ICC_CTLR_EL1_PRI_BITS_SHIFT; + pribits++; + + return pribits; +} + +static bool gic_has_group0(void) +{ + u32 val; + + /* + * Let's find out if Group0 is under control of EL3 or not by + * setting the highest possible, non-zero priority in PMR. + * + * If SCR_EL3.FIQ is set, the priority gets shifted down in + * order for the CPU interface to set bit 7, and keep the + * actual priority in the non-secure range. In the process, it + * looses the least significant bit and the actual priority + * becomes 0x80. Reading it back returns 0, indicating that + * we're don't have access to Group0. + */ + gic_write_pmr(BIT(8 - gic_get_pribits())); + val = gic_read_pmr(); + + return val != 0; +} + static void __init gic_dist_init(void) { unsigned int i; @@ -533,7 +566,7 @@ static void gic_cpu_sys_reg_init(void) u64 mpidr = cpu_logical_map(cpu); u64 need_rss = MPIDR_RS(mpidr); bool group0; - u32 val, pribits; + u32 pribits;
/* * Need to check that the SRE bit has actually been set. If @@ -545,25 +578,9 @@ static void gic_cpu_sys_reg_init(void) if (!gic_enable_sre()) pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n");
- pribits = gic_read_ctlr(); - pribits &= ICC_CTLR_EL1_PRI_BITS_MASK; - pribits >>= ICC_CTLR_EL1_PRI_BITS_SHIFT; - pribits++; + pribits = gic_get_pribits();
- /* - * Let's find out if Group0 is under control of EL3 or not by - * setting the highest possible, non-zero priority in PMR. - * - * If SCR_EL3.FIQ is set, the priority gets shifted down in - * order for the CPU interface to set bit 7, and keep the - * actual priority in the non-secure range. In the process, it - * looses the least significant bit and the actual priority - * becomes 0x80. Reading it back returns 0, indicating that - * we're don't have access to Group0. - */ - write_gicreg(BIT(8 - pribits), ICC_PMR_EL1); - val = read_gicreg(ICC_PMR_EL1); - group0 = val != 0; + group0 = gic_has_group0();
/* Set priority mask register */ write_gicreg(DEFAULT_PMR_VALUE, ICC_PMR_EL1); -- 1.9.1
|  |