lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/11] arm/arm64: dts: msm8974/msm8916: thermal: Add "qcom,sensors" property
Date
This new property allows the number of sensors to be configured from DT
instead of being hardcoded in platform data. Use it.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 56dbbf788d15..3c4b81c29798 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -433,6 +433,7 @@
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
#thermal-sensor-cells = <1>;
};

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 6a277fce3333..be27d8dc9e6b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -767,6 +767,7 @@
<0x4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
nvmem-cell-names = "calib", "calib_sel";
+ #qcom,sensors = <5>;
#thermal-sensor-cells = <1>;
};

--
2.17.1
\
 
 \ /
  Last update: 2018-08-28 15:39    [W:0.297 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site