lkml.org 
[lkml]   [2018]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 5/6] arm64: dts: ti: Add Support for AM654 SoC
* Kishon Vijay Abraham I <kishon@ti.com> [180827 03:06]:
> Hi Tony,
>
> On Monday 20 August 2018 08:01 PM, Tony Lindgren wrote:
> > * Kishon Vijay Abraham I <kishon@ti.com> [180808 06:35]:
> >> On Tuesday 05 June 2018 07:35 PM, Rob Herring wrote:
> >>> Really need 64-bit addresses and sizes? Use ranges to limit the
> >>> address space if possible.
> >>
> >> We now have address-cells as <1>,
> >> https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-am65.dtsi#n49
> >>
> >> However each PCIe instance has 2 data regions and one of the regions
> >> (PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1/PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 specified
> >> in the "MAIN Domain Memory Map" table of TRM http://www.ti.com/lit/pdf/spruid7)
> >> is above the 32bit region and requires 2 cells to specify the start address.
> >> This region is used to access MEM_SPACE of PCIe endpoint when operating in root
> >> complex mode and access memory of PCI root complex when operating in endpoint mode.
> >>
> >> In order to describe this, should we change the address-cells back to <2> or do
> >> you suggest any other alternatives?
> >
> > It's probably best to have the top level cbass interconnect use
> > #size-cells = <2> and then have it's child interconnects have
> > #size-cells = <1> if they don't need ranges above 4GB.
>
> PCIe has a region starting at 0x40_00000000 and size 4GB. We need 2 address
> cells and 2 size cells to describe this no?

Yes.

> > BTW, what's the difference between all these three similar PCIE
> > ranges?
> >
> > PCIE0_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005500000 0x0005600000 1 MB
> > PCIE1_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005600000 0x0005700000 1 MB
>
> This is the register space for the two instances of PCIe controller.
> >
> > PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0010000000 0x0018000000 128 MB
> > PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0018000000 0x0020000000 128 MB
> >
> > PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4000000000 0x4100000000 4 GB
> > PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4100000000 0x4200000000 4 GB
>
> The above are regions which can be used by CPU/DMA to access the PCIe address
> space. The mapping from the above regions to the PCIe address space will be
> programmed in the PCIe controller.

OK so not just somethng for dma-ranges but also accessible by
the CPU.

Regards,

Tony

\
 
 \ /
  Last update: 2018-08-27 17:56    [W:0.089 / U:17.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site