lkml.org 
[lkml]   [2018]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: chipidea: imx: enable OTG overcurrent in case USB subsystem is already started
Date
When initializing the USB subsystem before starting the kernel,
OTG overcurrent detection is disabled. In case the OTG polarity of
overcurrent is low active, the overcurrent detection is never enabled
again and events cannot be reported as expected. Because imx usb
overcurrent polarity is low active by default, only detection needs
to be enable in usbmisc init function.

Signed-off-by: Nicolas Adell <nicolas.adell@actia.fr>
---
drivers/usb/chipidea/usbmisc_imx.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 34ad5bf..424ecb1 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -343,6 +343,8 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
} else if (data->oc_polarity == 1) {
/* High active */
reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
+ } else {
+ reg &= ~(MX6_BM_OVER_CUR_DIS);
}
writel(reg, usbmisc->base + data->index * 4);

--
2.7.4
\
 
 \ /
  Last update: 2018-08-27 16:00    [W:0.025 / U:1.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site