lkml.org 
[lkml]   [2018]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] r8169: don't use MSI-X on RTL8106e
2018-08-23 21:38 GMT+08:00 Bjorn Helgaas <helgaas@kernel.org>:
> On Thu, Aug 23, 2018 at 06:46:28PM +0800, Jian-Hong Pan wrote:
>> > On 22.08.2018 13:44, Thomas Gleixner wrote:
>> >> Can you please do the following:
>>
>> Tested on ASUS X441AUR equipped with RTL8106e.
>> This is the laptop whose ethernet does not come back after resume, if
>> it does not fallback to MSI.
>> ...
>
>> dev@endless:~$ sudo lspci -xnnvvs 02:00.0
>> ...
>> 00: ec 10 36 81 07 04 10 00 07 00 00 02 10 00 00 00
>> 10: 01 e0 00 00 00 00 00 00 04 00 10 ef 00 00 00 00
>> 20: 0c 00 00 e0 00 00 00 00 00 00 00 00 43 10 0f 20
>> 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
>>
>> After comparing, there is no difference between before suspend and
>> after resume.
>
> It'd be better to compare the hex data directly and ignore the lspci
> decoding, since lspci doesn't decode everything. You only dumped the
> first 0x40 bytes of config space, and all capabilities, including the
> MSI and MSI-X capabilities, are past that:
>
>> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
>> Capabilities: [b0] MSI-X: Enable+ Count=4 Masked-
>> Vector table: BAR=4 offset=00000000
>> PBA: BAR=4 offset=00000800
>
> In addition, some of the MSI-X information for this device is in BAR
> 4. "lspci -xxx" will dump all config space, and you can use a tool
> like http://cmp.felk.cvut.cz/~pisa/linux/rdwrmem.c or
> https://github.com/billfarrow/pcimem to dump the BAR contents.

Tested on ASUS X441AUR equipped with RTL8106e without fallbacking to MSI again.
Use lspci and https://github.com/billfarrow/pcimem

Here is the status before suspend:

dev@endless:~$ sudo lspci -xxxs 02:00.0
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
00: ec 10 36 81 07 04 10 00 07 00 00 02 10 00 00 00
10: 01 e0 00 00 00 00 00 00 04 00 10 ef 00 00 00 00
20: 0c 00 00 e0 00 00 00 00 00 00 00 00 43 10 0f 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
40: 01 50 c3 ff 08 00 00 00 00 00 00 00 00 00 00 00
50: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 b0 02 02 c0 8d 90 05 10 20 10 00 11 7c 47 00
80: 42 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 1f 08 0c 00 00 04 00 00 02 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 11 d0 03 80 04 00 00 00 04 08 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

dev@endless:~$ sudo ~/pcimem/pcimem
/sys/devices/pci0000\:00/0000\:00\:1c.4/0000\:02\:00.0/resource4 0
b*16384
[sudo] password for dev:
/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0/resource4 opened.
Target offset is 0x0, page size is 4096
mmap(0, 16384, 0x3, 0x1, 3, 0x0)
PCI Memory mapped to address 0x7f15186d1000.
0x0000: 0x38
0x0001: 0x03
0x0002: 0xE0
0x0003: 0xFE
0x0004: 0x00
...
0x0010: 0x41
0x0011: 0x72
.
.
.
0x003C: 0x01
0x003D: 0x00
...
0x1000: 0x38
0x1001: 0x03
.
.
.

After resume:

dev@endless:~$ sudo lspci -xxxs 02:00.0
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
00: ec 10 36 81 07 04 10 00 07 00 00 02 10 00 00 00
10: 01 e0 00 00 00 00 00 00 04 00 10 ef 00 00 00 00
20: 0c 00 00 e0 00 00 00 00 00 00 00 00 43 10 0f 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
40: 01 50 c3 ff 08 00 00 00 00 00 00 00 00 00 00 00
50: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 b0 02 02 c0 8d 90 05 10 20 10 00 11 7c 47 00
80: 42 01 11 10 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 1f 08 0c 00 00 04 00 00 02 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 11 d0 03 80 04 00 00 00 04 08 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

dev@endless:~$ sudo ~/pcimem/pcimem
/sys/devices/pci0000\:00/0000\:00\:1c.4/0000\:02\:00.0/resource4 0
b*16384
/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0/resource4 opened.
Target offset is 0x0, page size is 4096
mmap(0, 16384, 0x3, 0x1, 3, 0x0)
PCI Memory mapped to address 0x7f8d68dd5000.
0x0000: 0xFF
...


The config is the same, but values in BAR=4 is weird after resume.
They all become 0xFF.

Regards,
Jian-Hong Pan

\
 
 \ /
  Last update: 2018-08-27 12:48    [W:0.040 / U:3.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site