lkml.org 
[lkml]   [2018]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] PCI: meson: add the Amlogic Meson PCIe controller driver
From
Date


On 2018/8/24 16:22, Jerome Brunet wrote:
> On Fri, 2018-08-24 at 15:36 +0800, Hanjie Lin wrote:
>> From: Yue Wang <yue.wang@amlogic.com>
>>
>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
>> PCI core. This patch adds the driver support for Meson PCIe controller.
>>
>> Signed-off-by: Yue Wang <yue.wang@amlogic.com>
>> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
>> ---
>> drivers/pci/controller/dwc/Kconfig | 12 +
>> drivers/pci/controller/dwc/Makefile | 1 +
>> drivers/pci/controller/dwc/pci-meson.c | 613 +++++++++++++++++++++++++++++++++
>> 3 files changed, 626 insertions(+)
>> create mode 100644 drivers/pci/controller/dwc/pci-meson.c
>>
>> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
>> index 91b0194..6cb36f6 100644
>> --- a/drivers/pci/controller/dwc/Kconfig
>> +++ b/drivers/pci/controller/dwc/Kconfig
>> @@ -193,4 +193,16 @@ config PCIE_HISI_STB
>> help
>> Say Y here if you want PCIe controller support on HiSilicon STB SoCs
>>
>> +config PCI_MESON
>> + bool "MESON PCIe controller"
>> + depends on PCI
>> + depends on PCI_MSI_IRQ_DOMAIN
>> + select PCIEPORTBUS
>> + select PCIE_DW_HOST
>> + help
>> + Say Y here if you want to enable PCI controller support on Amlogic
>> + SoCs. The PCI controller on Amlogic is based on DesignWare hardware
>> + and therefore the driver re-uses the DesignWare core functions to
>> + implement the driver.
>> +
>> endmenu
>> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
>> index 5d2ce72..cf676bd 100644
>> --- a/drivers/pci/controller/dwc/Makefile
>> +++ b/drivers/pci/controller/dwc/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
>> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
>> obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
>> obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
>> +obj-$(CONFIG_PCI_MESON) += pci-meson.o
>>
>> # The following drivers are for devices that use the generic ACPI
>> # pci_root.c driver but don't support standard ECAM config access.
>> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
>> new file mode 100644
>> index 0000000..a9edf20
>> --- /dev/null
>> +++ b/drivers/pci/controller/dwc/pci-meson.c
>> @@ -0,0 +1,613 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe host controller driver for Amlogic MESON SoCs
>> + *
>> + * Copyright (c) 2018 Amlogic, inc.
>> + * Author: Yue Wang <yue.wang@amlogic.com>
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/resource.h>
>> +#include <linux/types.h>
>> +#include <linux/reset.h>
>> +
>> +#include "pcie-designware.h"
>> +
>> +#define to_meson_pcie(x) dev_get_drvdata((x)->dev)
>> +
>> +/* External local bus interface registers */
>> +#define PLR_OFFSET 0x700
>> +#define PCIE_PORT_LINK_CTRL_OFF (PLR_OFFSET + 0x10)
>> +#define FAST_LINK_MODE BIT(7)
>> +#define LINK_CAPABLE_MASK GENMASK(21, 16)
>> +#define LINK_CAPABLE_X1 BIT(16)
>> +
>> +#define PCIE_GEN2_CTRL_OFF (PLR_OFFSET + 0x10c)
>> +#define NUM_OF_LANES_MASK GENMASK(12, 8)
>> +#define NUM_OF_LANES_X1 BIT(8)
>> +#define DIRECT_SPEED_CHANGE BIT(17)
>> +
>> +#define TYPE1_HDR_OFFSET 0x0
>> +#define PCIE_STATUS_COMMAND (TYPE1_HDR_OFFSET + 0x04)
>> +#define PCI_IO_EN BIT(0)
>> +#define PCI_MEM_SPACE_EN BIT(1)
>> +#define PCI_BUS_MASTER_EN BIT(2)
>> +
>> +#define PCIE_BASE_ADDR0 (TYPE1_HDR_OFFSET + 0x10)
>> +#define PCIE_BASE_ADDR1 (TYPE1_HDR_OFFSET + 0x14)
>> +
>> +#define PCIE_CAP_OFFSET 0x70
>> +#define PCIE_DEV_CTRL_DEV_STUS (PCIE_CAP_OFFSET + 0x08)
>> +#define PCIE_CAP_MAX_PAYLOAD_MASK GENMASK(7, 5)
>> +#define PCIE_CAP_MAX_PAYLOAD_SIZE(x) ((x) << 5)
>> +#define PCIE_CAP_MAX_READ_REQ_MASK GENMASK(14, 12)
>> +#define PCIE_CAP_MAX_READ_REQ_SIZE(x) ((x) << 12)
>> +
>> +#define PCI_CLASS_REVISION_MASK GENMASK(7, 0)
>> +
>> +/* PCIe specific config registers */
>> +#define PCIE_CFG0 0x0
>> +#define APP_LTSSM_ENABLE BIT(7)
>> +
>> +#define PCIE_CFG_STATUS12 0x30
>> +#define IS_SMLH_LINK_UP(x) ((x) & (1 << 6))
>> +#define IS_RDLH_LINK_UP(x) ((x) & (1 << 16))
>> +#define IS_LTSSM_UP(x) ((((x) >> 10) & 0x1f) == 0x11)
>> +
>> +#define PCIE_CFG_STATUS17 0x44
>> +#define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1)
>> +
>> +#define WAIT_LINKUP_TIMEOUT 2000
>> +#define PORT_CLK_RATE 100000000UL
>> +#define MAX_PAYLOAD_SIZE 256
>> +#define MAX_READ_REQ_SIZE 256
>> +
>> +enum pcie_data_rate {
>> + PCIE_GEN1,
>> + PCIE_GEN2,
>> + PCIE_GEN3,
>> + PCIE_GEN4
>> +};
>> +
>> +struct meson_pcie_mem_res {
>> + void __iomem *elbi_base; /* DT 0th resource */
>> + void __iomem *cfg_base; /* DT 2nd resource */
>> +};
>> +
>> +struct meson_pcie_clk_res {
>> + struct clk *clk;
>> + struct clk *mipi_gate;
>> + struct clk *port_clk;
>> + struct clk *general_clk;
>> +};
>> +
>> +struct meson_pcie_rc_reset {
>> + struct reset_control *port;
>> + struct reset_control *apb;
>> +};
>> +
>> +struct meson_pcie {
>> + struct dw_pcie pci;
>> + struct meson_pcie_mem_res mem_res;
>> + struct meson_pcie_clk_res clk_res;
>> + struct meson_pcie_rc_reset mrst;
>> + struct gpio_desc *reset_gpio;
>> +
>> + struct phy *phy;
>> + enum of_gpio_flags gpio_flag;
>> + int pcie_num;
>> + u32 port_num;
>> + u32 device_attch;
>> +};
>> +
>> +static int meson_pcie_get_mem(struct platform_device *pdev,
>> + struct meson_pcie *mp)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct resource *res;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
>> + if (!res)
>> + return -ENODEV;
>> +
>> + mp->mem_res.elbi_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(mp->mem_res.elbi_base))
>> + return PTR_ERR(mp->mem_res.elbi_base);
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> + if (!res)
>> + return -ENODEV;
>> +
>> + mp->mem_res.cfg_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(mp->mem_res.cfg_base))
>> + return PTR_ERR(mp->mem_res.cfg_base);
>> +
>> + return 0;
>> +}
>> +
>> +static void meson_pcie_rc_reset(struct meson_pcie *mp)
>> +{
>> + struct meson_pcie_rc_reset *mrst = &mp->mrst;
>> +
>> + reset_control_assert(mrst->port);
>> + reset_control_assert(mrst->apb);
>> + udelay(400);
>> + reset_control_deassert(mrst->port);
>> + reset_control_deassert(mrst->apb);
>> + udelay(500);
>> +}
>> +
>> +static int meson_pcie_init_clk(struct meson_pcie *mp)
>> +{
>> + struct device *dev = mp->pci.dev;
>> + struct meson_pcie_clk_res *res = &mp->clk_res;
>> + int ret;
>> +
>> + res->port_clk = devm_clk_get(dev, "port");
>> + if (IS_ERR(res->port_clk)) {
>> + if (PTR_ERR(res->port_clk) != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get pcie port clock\n");
>> +
>> + return PTR_ERR(res->port_clk);
>> + }
>> +
>> + res->mipi_gate = devm_clk_get(dev, "pcie_mipi_en");
>> + if (IS_ERR(res->mipi_gate)) {
>> + if (PTR_ERR(res->mipi_gate) != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get pcie mipi clock\n");
>> +
>> + return PTR_ERR(res->mipi_gate);
>> + }
>> +
>> + res->general_clk = devm_clk_get(dev, "pcie_general");
>> + if (IS_ERR(res->general_clk)) {
>> + if (PTR_ERR(res->general_clk) != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get pcie general clock\n");
>> +
>> + return PTR_ERR(res->general_clk);
>> + }
>> +
>> + res->clk = devm_clk_get(dev, "pcie");
>> + if (IS_ERR(res->clk)) {
>> + if (PTR_ERR(res->clk) != -EPROBE_DEFER)
>> + dev_err(dev, "Failed to get pcie rc clock\n");
>> +
>> + return PTR_ERR(res->clk);
>> + }
>> +
>> + phy_init(mp->phy);
>> + meson_pcie_rc_reset(mp);
>> +
>> + ret = clk_set_rate(res->port_clk, PORT_CLK_RATE);
>> + if (ret) {
>> + dev_err(dev, "set bus clk rate failed, ret = %d", ret);
>> + goto err_clk;
>> + }
>> +
>> + ret = clk_prepare_enable(res->port_clk);
>> + if (ret) {
>> + dev_err(dev, "cannot enable pcie port clock");
>> + goto err_clk;
>> + }
>> +
>> + ret = clk_prepare_enable(res->mipi_gate);
>> + if (ret) {
>> + dev_err(dev, "cannot enable pcie mipi gate clock");
>> + goto err_port_clk;
>> + }
>> +
>> + ret = clk_prepare_enable(res->general_clk);
>> + if (ret) {
>> + dev_err(dev, "cannot enable pcie general clock");
>> + goto err_mipi_gate;
>> + }
>> +
>> + ret = clk_prepare_enable(res->clk);
>> + if (ret) {
>> + dev_err(dev, "cannot enable pcie rc clock");
>> + goto err_general_clk;
>> + }
>> +
>> + return 0;
>> +
>> +err_general_clk:
>> + clk_disable_unprepare(res->general_clk);
>> +err_mipi_gate:
>> + clk_disable_unprepare(res->mipi_gate);
>> +err_port_clk:
>> + clk_disable_unprepare(res->port_clk);
>> +err_clk:
>> + return ret;
>
> You are doing this from device probe but there is no remove counter part,
> meaning the clock will be left enabled when the device is removed (and clock
> count unbalanced). To just fire and forget clock, like you are doing, you could
> use :
>
> devm_add_action_or_reset(dev, (void(*)(void *))clk_disable_unprepare,
> <you-clk>);
>
> This will take care of the errors cases and driver removal
> Maybe you could make an helper function to do the get - enable - add reset.
> Also, if the you just fire and forget the clock in this way, you don't need to
> keep the clock pointer around (in your device data)
>
> Last, do you really need to enable all the clocks at probe time ? Can't some be
> enabled later on. I don't know much about pcie but maybe some enable could be
> delayed until the pcie bus is actually connected to something ? in use ?
>

Yes, it's better to use devm_add_action_or_reset().

Amlogic pcie driver doesn't support hotplug, so we must enable all clocks
during system initialization.

>> +}
>> +
>> +static void meson_pcie_deinit_clk(struct meson_pcie *mp)
>> +{
>> + clk_disable_unprepare(mp->clk_res.clk);
>> + clk_disable_unprepare(mp->clk_res.general_clk);
>> + clk_disable_unprepare(mp->clk_res.mipi_gate);
>> + clk_disable_unprepare(mp->clk_res.port_clk);
>> +}
>
> ... then you can remove this function

Ok, we'll remove this.

>
>> +
>> +static inline void meson_elb_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> + writel(val, mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_elb_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> + return readl(mp->mem_res.elbi_base + reg);
>> +}
>> +
>> +static inline u32 meson_cfg_readl(struct meson_pcie *mp, u32 reg)
>> +{
>> + return readl(mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
>> +{
>> + writel(val, mp->mem_res.cfg_base + reg);
>> +}
>> +
>> +static void meson_pcie_assert_reset(struct meson_pcie *mp)
>> +{
>> + gpiod_set_value_cansleep(mp->reset_gpio, 0);
>> + udelay(500);
>> + gpiod_set_value_cansleep(mp->reset_gpio, 1);
>> +}
>> +
>> +static void meson_pcie_init_dw(struct meson_pcie *mp)
>> +{
>> + u32 val = 0;
>> +
>> + val = meson_cfg_readl(mp, PCIE_CFG0);
>> + val |= APP_LTSSM_ENABLE;
>> + meson_cfg_writel(mp, val, PCIE_CFG0);
>> +
>> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> + val &= ~LINK_CAPABLE_MASK;
>> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF);
>> + val |= LINK_CAPABLE_X1 | FAST_LINK_MODE;
>> + meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> + val &= ~NUM_OF_LANES_MASK;
>> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> + val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
>> + val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
>> + meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
>> +
>> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
>> + meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
>> +}
>> +
>> +static int meson_size_to_payload(int size)
>> +{
>> + if (size & (size - 1) || size < 128 || size > 4096)
>> + return 1;
>> +
>> + return fls(size) - 8;
>> +}
>> +
>> +static void meson_set_max_payload(struct meson_pcie *mp, int size)
>> +{
>> + u32 val = 0;
>> + int max_payload_size = meson_size_to_payload(size);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val &= ~PCIE_CAP_MAX_PAYLOAD_MASK;
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
>> +{
>> + u32 val = 0;
>> + int max_rd_req_size = meson_size_to_payload(size);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val &= ~PCIE_CAP_MAX_READ_REQ_MASK;
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +
>> + val = meson_elb_readl(mp, PCIE_DEV_CTRL_DEV_STUS);
>> + val |= PCIE_CAP_MAX_READ_REQ_SIZE(max_rd_req_size);
>> + meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
>> +}
>> +
>> +static inline void meson_enable_memory_space(struct meson_pcie *mp)
>> +{
>> + /* Set the RC Bus Master, Memory Space and I/O Space enables */
>> + meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
>> + PCIE_STATUS_COMMAND);
>> +}
>> +
>> +static int meson_pcie_establish_link(struct meson_pcie *mp)
>> +{
>> + struct dw_pcie *pci = &mp->pci;
>> + struct pcie_port *pp = &pci->pp;
>> +
>> + meson_pcie_init_dw(mp);
>> + meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
>> + meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
>> +
>> + dw_pcie_setup_rc(pp);
>> + meson_enable_memory_space(mp);
>> +
>> + meson_pcie_assert_reset(mp);
>> +
>> + /* check if the link is up or not */
>> + if (!dw_pcie_wait_for_link(pci))
>> + return 0;
>> +
>> + return -ETIMEDOUT;
>> +}
>> +
>> +static void meson_pcie_msi_init(struct meson_pcie *mp)
>> +{
>> + struct pcie_port *pp = &mp->pci.pp;
>> +
>> + dw_pcie_msi_init(pp);
>> +}
>> +
>> +static void meson_pcie_enable_interrupts(struct meson_pcie *mp)
>> +{
>> + if (IS_ENABLED(CONFIG_PCI_MSI))
>> + meson_pcie_msi_init(mp);
>> +}
>> +
>> +static u32 meson_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
>> + u32 reg, size_t size)
>> +{
>> + u32 val;
>> +
>> + dw_pcie_read(base + reg, size, &val);
>> +
>> + return val;
>> +}
>> +
>> +static void meson_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
>> + u32 reg, size_t size, u32 val)
>> +{
>> + dw_pcie_write(base + reg, size, val);
>> +}
>> +
>> +static int meson_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
>> + u32 *val)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> +
>> + if (!mp->device_attch)
>> + return 0;
>> +
>> + /* the device class is not reported correctly from the register */
>> + if (where == PCI_CLASS_REVISION) {
>> + *val = readl(pci->dbi_base + PCI_CLASS_REVISION);
>> + /* keep revision id */
>> + *val &= PCI_CLASS_REVISION_MASK;
>> + *val |= PCI_CLASS_BRIDGE_PCI << 16;
>> + return PCIBIOS_SUCCESSFUL;
>> + }
>> +
>> + return dw_pcie_read(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_wr_own_conf(struct pcie_port *pp, int where,
>> + int size, u32 val)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> +
>> + if (!mp->device_attch)
>> + return 0;
>> +
>> + return dw_pcie_write(pci->dbi_base + where, size, val);
>> +}
>> +
>> +static int meson_pcie_link_up(struct dw_pcie *pci)
>> +{
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> + struct device *dev = pci->dev;
>> + u32 smlh_up = 0;
>> + u32 ltssm_up = 0;
>> + u32 rdlh_up = 0;
>> + u32 speed_okay = 0;
>> + u32 cnt = 0;
>> + u32 state12, state17;
>> +
>> + while (smlh_up == 0 || rdlh_up == 0 || ltssm_up == 0 ||
>> + speed_okay == 0) {
>> + udelay(20);
>> +
>> + state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12);
>> + state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17);
>> + smlh_up = IS_SMLH_LINK_UP(state12);
>> + rdlh_up = IS_RDLH_LINK_UP(state12);
>> + ltssm_up = IS_LTSSM_UP(state12);
>> +
>> + if (PM_CURRENT_STATE(state17) < PCIE_GEN3)
>> + speed_okay = 1;
>> +
>> + if (smlh_up)
>> + dev_dbg(dev, "smlh_link_up is on\n");
>> + if (rdlh_up)
>> + dev_dbg(dev, "rdlh_link_up is on\n");
>> + if (ltssm_up)
>> + dev_dbg(dev, "ltssm_up is on\n");
>> + if (speed_okay)
>> + dev_dbg(dev, "speed_okay\n");
>> +
>> + cnt++;
>> +
>> + if (cnt >= WAIT_LINKUP_TIMEOUT) {
>> + dev_err(dev, "Error: Wait linkup timeout.\n");
>> + return 0;
>> + }
>> + }
>> +
>> + return 1;
>> +}
>> +
>> +static int meson_pcie_host_init(struct pcie_port *pp)
>> +{
>> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
>> + struct meson_pcie *mp = to_meson_pcie(pci);
>> + int ret;
>> +
>> + ret = meson_pcie_establish_link(mp);
>> +
>> + if (ret)
>> + return ret;
>> +
>> + mp->device_attch = 1;
>> + meson_pcie_enable_interrupts(mp);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dw_pcie_host_ops meson_pcie_host_ops = {
>> + .rd_own_conf = meson_pcie_rd_own_conf,
>> + .wr_own_conf = meson_pcie_wr_own_conf,
>> + .host_init = meson_pcie_host_init,
>> +};
>> +
>> +static int meson_add_pcie_port(struct meson_pcie *mp,
>> + struct platform_device *pdev)
>> +{
>> + struct dw_pcie *pci = &mp->pci;
>> + struct pcie_port *pp = &pci->pp;
>> + struct device *dev = &pdev->dev;
>> + int ret;
>> +
>> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
>> + pp->msi_irq = platform_get_irq(pdev, 0);
>> + if (pp->msi_irq < 0) {
>> + dev_err(dev, "failed to get msi irq\n");
>> + return pp->msi_irq;
>> + }
>> + }
>> +
>> + pp->root_bus_nr = -1;
>> + pp->ops = &meson_pcie_host_ops;
>> + pci->dbi_base = mp->mem_res.elbi_base;
>> +
>> + ret = dw_pcie_host_init(pp);
>> + if (ret) {
>> + dev_err(dev, "failed to initialize host\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dw_pcie_ops dw_pcie_ops = {
>> + .read_dbi = meson_pcie_read_dbi,
>> + .write_dbi = meson_pcie_write_dbi,
>> + .link_up = meson_pcie_link_up,
>> +};
>> +
>> +static int meson_pcie_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct dw_pcie *pci;
>> + struct meson_pcie *mp;
>> + struct meson_pcie_rc_reset *mrst;
>> + int ret;
>> +
>> + mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL);
>> + if (!mp)
>> + return -ENOMEM;
>> +
>> + pci = &mp->pci;
>> + pci->dev = dev;
>> + pci->ops = &dw_pcie_ops;
>> +
>> + mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>> + if (IS_ERR(mp->reset_gpio)) {
>> + dev_err(dev, "Get reset gpio failed\n");
>> + return PTR_ERR(mp->reset_gpio);
>> + }
>> +
>> + mp->phy = devm_of_phy_get(dev, np, NULL);
>
> For the 3rd time, you do *not* need a phy driver to just handle a reset line.
> It is overkill.
>
> you should claim the shared reset line here and be done with it.
>

As your suggestion, we'll integrate phy driver into the controller and use
shared reset line here.

>> + if (IS_ERR(mp->phy)) {
>> + if (PTR_ERR(mp->phy) != -EPROBE_DEFER)
>> + dev_err(dev, "Get phy failed, set default %ld\n",
>> + PTR_ERR(mp->phy));
>> + return PTR_ERR(mp->phy);
>> + }
>> +
>> + mrst = &mp->mrst;
>> +
>> + mrst->port = devm_reset_control_get_shared(dev, "port");
>
> There is no reason for this reset to be shared since there is one per pcie port.
>

Yes, we will correct it.
Thanks for suggestions.

>> + if (IS_ERR(mrst->port)) {
>> + if (PTR_ERR(mrst->port) != -EPROBE_DEFER)
>> + dev_err(dev, "couldn't get port reset %ld\n",
>> + PTR_ERR(mrst->port));
>> +
>> + return PTR_ERR(mrst->port);
>> + }
>> +
>> + mrst->apb = devm_reset_control_get_shared(dev, "apb");
>> + if (IS_ERR(mrst->apb)) {
>> + if (PTR_ERR(mrst->apb) != -EPROBE_DEFER)
>> + dev_err(dev, "couldn't get apb reset\n");
>> +
>> + return PTR_ERR(mrst->apb);
>> + }
>> +
>> + reset_control_deassert(mrst->port);
>> + reset_control_deassert(mrst->apb);
>> +
>> + phy_power_on(mp->phy);
>> +
>> + ret = meson_pcie_init_clk(mp);
>> + if (ret) {
>> + dev_err(dev, "Init clock resources failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = meson_pcie_get_mem(pdev, mp);
>> + if (ret) {
>> + dev_err(dev, "Get memory resource failed, %d\n", ret);
>> + return ret;
>> + }
>> +
>> + platform_set_drvdata(pdev, mp);
>> +
>> + ret = meson_add_pcie_port(mp, pdev);
>> + if (ret < 0) {
>> + dev_err(dev, "Add PCIE port failed, %d\n", ret);
>> + meson_pcie_deinit_clk(mp);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static const struct of_device_id meson_pcie_of_match[] = {
>> + {
>> + .compatible = "amlogic,axg-pcie",
>> + },
>> + {},
>> +};
>> +
>> +static struct platform_driver meson_pcie_driver = {
>> + .probe = meson_pcie_probe,
>> + .driver = {
>> + .name = "meson-pcie",
>> + .of_match_table = meson_pcie_of_match,
>> + },
>> +};
>> +
>> +builtin_platform_driver(meson_pcie_driver);
>
>
> .
>

\
 
 \ /
  Last update: 2018-08-27 11:32    [W:0.056 / U:1.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site