lkml.org 
[lkml]   [2018]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] drm/kms/crtc: Improving the func drm_mode_setcrtc
Date
On Fri, 27 Jul 2018, Satendra Singh Thakur <satendra.t@samsung.com> wrote:
> Following changes are done to this func:

Just a drive-by observation, if your commit message lists a number of
changes, with "also", it's usually an indication they should be separate
patches.

BR,
Jani.


> 1. Currently there are many redundant error checks for
> count_connectors, mode, fb and mode_valid.
> if (crtc_req->mode_valid)
> if (crtc_req->count_connectors == 0 && mode)
> if (crtc_req->count_connectors > 0 && (!mode || !fb))
> if (crtc_req->count_connectors > 0)
> if (crtc_req->count_connectors > config->num_connector)
>
> These 5 checks are replaced by just 2 checks.
> if (!crtc_req->mode_valid)
> if (!crtc_req->count_connectors ||
> crtc_req->count_connectors > config->num_connector)
>
> 2. Also, currently, if user pass invalid args
> count_connectors=0, mode=NULL, fb=NULL, code wont throw
> any errors and eventually __drm_mode_set_config_internal
> will be called.
> With the modified code, this will be taken care.
>
> 3. Also, these error checks alongwith following
> if (!file_priv->aspect_ratio_allowed &&
> (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK)
>
> has been moved before taking mutex and modeset lock
> because they don't need any lock. Moreover, after grabbing locks,
> if its found that user supplied invalid args, it will
> be too late as getting lock may require considerable time.
>
> 4. Also, if modeset_lock is tried many times in case of EDEADLK
> error, then this will be the code flow
>
> retry:
> ret = drm_modeset_lock_all_ctx(crtc->dev, &ctx);
>
> if (ret)-->this is true
> goto out;
>
> out:
> if (fb)
> if (connector_set)
> drm_mode_destroy(dev, mode);
> if (ret == -EDEADLK)
> goto retry;
> It can be observed that checks on fb, connector_set and call to
> mode_destroy are redundant in retry-case.
> If we keep if (ret == -EDEADLK) just after out:,
> that will avoid redundant checks.
>
> In the normal case (non-retry), all checks will be required.
> Thus shifting of if (ret == -EDEADLK) right after out label
> won't affect normal case.
>
> 5. Also, kfree is moved inside if (connector_set).
> 6. Also, if major error checks are in the beginning of the func
> and if user supplied invalid params, we will exit the func sooner
> without wasting much effort in finding crtc and framebuffer etc.
>
> Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
> ---
> drivers/gpu/drm/drm_crtc.c | 207 +++++++++++++++++++++------------------------
> 1 file changed, 98 insertions(+), 109 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index 98a36e6..15927e7 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -578,7 +578,25 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
> */
> if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000)
> return -ERANGE;
> -
> + if (!file_priv->aspect_ratio_allowed &&
> + (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) !=
> + DRM_MODE_FLAG_PIC_AR_NONE) {
> + DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
> + return -EINVAL;
> + }
> + /* Check if the flag is set*/
> + if (!crtc_req->mode_valid) {
> + DRM_DEBUG_KMS("mode_valid flag [%d] is not set\n",
> + crtc_req->mode_valid);
> + return -EINVAL;
> + }
> + /* Check the validity of count_connectors supplied by user */
> + if (!crtc_req->count_connectors ||
> + crtc_req->count_connectors > config->num_connector) {
> + DRM_DEBUG_KMS("Invalid connectors' count %d\n",
> + crtc_req->count_connectors);
> + return -EINVAL;
> + }
> crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id);
> if (!crtc) {
> DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
> @@ -595,134 +613,105 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
> if (ret)
> goto out;
>
> - if (crtc_req->mode_valid) {
> - /* If we have a mode we need a framebuffer. */
> - /* If we pass -1, set the mode with the currently bound fb */
> - if (crtc_req->fb_id == -1) {
> - struct drm_framebuffer *old_fb;
> + /* If we have a mode we need a framebuffer. */
> + /* If we pass -1, set the mode with the currently bound fb */
> + if (crtc_req->fb_id == -1) {
> + struct drm_framebuffer *old_fb;
>
> - if (plane->state)
> - old_fb = plane->state->fb;
> - else
> - old_fb = plane->fb;
> + if (plane->state)
> + old_fb = plane->state->fb;
> + else
> + old_fb = plane->fb;
>
> - if (!old_fb) {
> - DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - fb = old_fb;
> - /* Make refcounting symmetric with the lookup path. */
> - drm_framebuffer_get(fb);
> - } else {
> - fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
> - if (!fb) {
> - DRM_DEBUG_KMS("Unknown FB ID%d\n",
> - crtc_req->fb_id);
> - ret = -ENOENT;
> - goto out;
> - }
> - }
> -
> - mode = drm_mode_create(dev);
> - if (!mode) {
> - ret = -ENOMEM;
> - goto out;
> - }
> - if (!file_priv->aspect_ratio_allowed &&
> - (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
> - DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
> + if (!old_fb) {
> + DRM_DEBUG_KMS("CRTC doesn't have current FB\n");
> ret = -EINVAL;
> goto out;
> }
>
> -
> - ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
> - if (ret) {
> - DRM_DEBUG_KMS("Invalid mode\n");
> + fb = old_fb;
> + /* Make refcounting symmetric with the lookup path. */
> + drm_framebuffer_get(fb);
> + } else {
> + fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);
> + if (!fb) {
> + DRM_DEBUG_KMS("Unknown FB ID%d\n",
> + crtc_req->fb_id);
> + ret = -ENOENT;
> goto out;
> }
> -
> - /*
> - * Check whether the primary plane supports the fb pixel format.
> - * Drivers not implementing the universal planes API use a
> - * default formats list provided by the DRM core which doesn't
> - * match real hardware capabilities. Skip the check in that
> - * case.
> - */
> - if (!plane->format_default) {
> - ret = drm_plane_check_pixel_format(plane,
> - fb->format->format,
> - fb->modifier);
> - if (ret) {
> - struct drm_format_name_buf format_name;
> - DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",
> - drm_get_format_name(fb->format->format,
> - &format_name),
> - fb->modifier);
> - goto out;
> - }
> - }
> -
> - ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
> - mode, fb);
> - if (ret)
> - goto out;
> -
> }
>
> - if (crtc_req->count_connectors == 0 && mode) {
> - DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");
> - ret = -EINVAL;
> + mode = drm_mode_create(dev);
> + if (!mode) {
> + ret = -ENOMEM;
> goto out;
> }
>
> - if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
> - DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",
> - crtc_req->count_connectors);
> - ret = -EINVAL;
> + ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
> + if (ret) {
> + DRM_DEBUG_KMS("Invalid mode\n");
> goto out;
> }
>
> - if (crtc_req->count_connectors > 0) {
> - u32 out_id;
> + /*
> + * Check whether the primary plane supports the fb pixel format.
> + * Drivers not implementing the universal planes API use a
> + * default formats list provided by the DRM core which doesn't
> + * match real hardware capabilities. Skip the check in that
> + * case.
> + */
> + if (!plane->format_default) {
> + ret = drm_plane_check_pixel_format(plane,
> + fb->format->format,
> + fb->modifier);
> + if (ret) {
> + struct drm_format_name_buf format_name;
>
> - /* Avoid unbounded kernel memory allocation */
> - if (crtc_req->count_connectors > config->num_connector) {
> - ret = -EINVAL;
> + DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",
> + drm_get_format_name(fb->format->format,
> + &format_name),
> + fb->modifier);
> goto out;
> }
> + }
>
> - connector_set = kmalloc_array(crtc_req->count_connectors,
> + ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
> + mode, fb);
> + if (ret)
> + goto out;
> +
> + connector_set = kmalloc_array(crtc_req->count_connectors,
> sizeof(struct drm_connector *),
> GFP_KERNEL);
> - if (!connector_set) {
> - ret = -ENOMEM;
> - goto out;
> - }
> + if (!connector_set) {
> + ret = -ENOMEM;
> + goto out;
> + }
>
> - for (i = 0; i < crtc_req->count_connectors; i++) {
> - connector_set[i] = NULL;
> - set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
> - if (get_user(out_id, &set_connectors_ptr[i])) {
> - ret = -EFAULT;
> - goto out;
> - }
> + for (i = 0; i < crtc_req->count_connectors; i++) {
> + u32 out_id;
>
> - connector = drm_connector_lookup(dev, file_priv, out_id);
> - if (!connector) {
> - DRM_DEBUG_KMS("Connector id %d unknown\n",
> - out_id);
> - ret = -ENOENT;
> - goto out;
> - }
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> - connector->base.id,
> - connector->name);
> + connector_set[i] = NULL;
> + set_connectors_ptr =
> + (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;
> + if (get_user(out_id, &set_connectors_ptr[i])) {
> + ret = -EFAULT;
> + goto out;
> + }
>
> - connector_set[i] = connector;
> + connector = drm_connector_lookup(dev, file_priv, out_id);
> + if (!connector) {
> + DRM_DEBUG_KMS("Connector id %d unknown\n",
> + out_id);
> + ret = -ENOENT;
> + goto out;
> }
> + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> + connector->base.id,
> + connector->name);
> +
> + connector_set[i] = connector;
> }
>
> set.crtc = crtc;
> @@ -735,6 +724,11 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
> ret = __drm_mode_set_config_internal(&set, &ctx);
>
> out:
> + if (ret == -EDEADLK) {
> + ret = drm_modeset_backoff(&ctx);
> + if (!ret)
> + goto retry;
> + }
> if (fb)
> drm_framebuffer_put(fb);
>
> @@ -743,14 +737,9 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
> if (connector_set[i])
> drm_connector_put(connector_set[i]);
> }
> + kfree(connector_set);
> }
> - kfree(connector_set);
> drm_mode_destroy(dev, mode);
> - if (ret == -EDEADLK) {
> - ret = drm_modeset_backoff(&ctx);
> - if (!ret)
> - goto retry;
> - }
> drm_modeset_drop_locks(&ctx);
> drm_modeset_acquire_fini(&ctx);
> mutex_unlock(&crtc->dev->mode_config.mutex);

--
Jani Nikula, Intel Open Source Graphics Center

\
 
 \ /
  Last update: 2018-08-24 15:50    [W:0.146 / U:3.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site