lkml.org 
[lkml]   [2018]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] iio: chemical: bme680: Add check for val2 in the write_raw function
On Sun, 19 Aug 2018 22:40:14 +0530
Himanshu Jha <himanshujha199640@gmail.com> wrote:

> On Sun, Aug 19, 2018 at 05:25:14PM +0100, Jonathan Cameron wrote:
> > On Sat, 11 Aug 2018 15:56:36 +0530
> > Himanshu Jha <himanshujha199640@gmail.com> wrote:
> >
> > > val2 is responsible for the floating part of the number to be
> > > written to the device. We don't need the floating part
> > > while writing the oversampling ratio for BME680 since the
> > > available oversampling ratios are pure natural numbers.
> > >
> > > So, add a sanity check to make sure val2 is 0.
> > >
> > > Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
> >
> > As discussed in David's patch series v3, I think this is still relevant
> > but now needs an update to cover the new code.
>
> I already had informed David to reabse his series on top of my patch
> and he rebased this patch series.
>
> So, it should apply cleanly without any further effort.
>
> If it doesn't, then ping me.

Meh, was only some trivial fuzz. I thought things had changed more than that
as hadn't noticed you just applied it at the top of write_raw as all the
things that can be written in this driver are integers.

Anyhow, applied now. Thanks,

Jonathan
>

\
 
 \ /
  Last update: 2018-08-19 21:09    [W:0.028 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site