lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 02/10] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
Hi Rob,

On Mon, Aug 13, 2018 at 04:31:03PM -0600, Rob Herring wrote:
> On Mon, Jul 30, 2018 at 02:43:47PM +0200, Quentin Schulz wrote:
> > HSIO register address space should be handled outside of the MAC
> > controller as there are some registers for PLL5 configuring,
> > SerDes/switch port muxing and a thermal sensor IP, so let's remove it.
> >
> > Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/mips/mscc.txt | 16 ++++++++++++-
> > Documentation/devicetree/bindings/net/mscc-ocelot.txt | 9 ++-----
> > 2 files changed, 19 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
> > index ae15ec3..bc817e9 100644
> > --- a/Documentation/devicetree/bindings/mips/mscc.txt
> > +++ b/Documentation/devicetree/bindings/mips/mscc.txt
> > @@ -41,3 +41,19 @@ Example:
> > compatible = "mscc,ocelot-cpu-syscon", "syscon";
> > reg = <0x70000000 0x2c>;
> > };
> > +
> > +o HSIO regs:
> > +
> > +The SoC has a few registers (HSIO) handling miscellaneous functionalities:
> > +configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
> > +status, SerDes muxing and a thermal sensor.
> > +
> > +Required properties:
> > +- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
> > +- reg : Should contain registers location and length
> > +
> > +Example:
> > + syscon@10d0000 {
> > + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
>
> simple-mfd is not appropriate without child nodes, so drop it.
>

Understood but it's an intermediate patch. Later (patch 8), the SerDes
muxing "controller" is added as a child to this node. There most likely
will be some others in the future (temperature sensor for example).

Furthermore, there's already a simple-mfd without children in this file:
https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/mips/mscc.txt#L19

How should we handle this case?

Thanks,
Quentin

> > + reg = <0x10d0000 0x10000>;
> > + };
> > diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> > index 0a84711..9e5c17d 100644
> > --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> > +++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> > @@ -12,7 +12,6 @@ Required properties:
> > - "sys"
> > - "rew"
> > - "qs"
> > - - "hsio"
> > - "qsys"
> > - "ana"
> > - "portX" with X from 0 to the number of last port index available on that
> > @@ -45,7 +44,6 @@ Example:
> > reg = <0x1010000 0x10000>,
> > <0x1030000 0x10000>,
> > <0x1080000 0x100>,
> > - <0x10d0000 0x10000>,
> > <0x11e0000 0x100>,
> > <0x11f0000 0x100>,
> > <0x1200000 0x100>,
> > @@ -59,10 +57,9 @@ Example:
> > <0x1280000 0x100>,
> > <0x1800000 0x80000>,
> > <0x1880000 0x10000>;
> > - reg-names = "sys", "rew", "qs", "hsio", "port0",
> > - "port1", "port2", "port3", "port4", "port5",
> > - "port6", "port7", "port8", "port9", "port10",
> > - "qsys", "ana";
> > + reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
> > + "port3", "port4", "port5", "port6", "port7",
> > + "port8", "port9", "port10", "qsys", "ana";
> > interrupts = <21 22>;
> > interrupt-names = "xtr", "inj";
> >
> > --
> > git-series 0.9.1
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-08-14 08:50    [W:0.065 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site