lkml.org 
[lkml]   [2018]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 5/7] i2c: fsi: Add transfer implementation
From
Date


On 07/02/2018 01:24 PM, Wolfram Sang wrote:
>>>> + if (msg->flags & I2C_M_RD)
>>>> + cmd |= I2C_CMD_READ;
>>> Since you support MANGLING, I'd think you can easily support
>>> I2C_M_REV_DIR_ADDR here, too?
>> Hm, I don't really understand the purpose of that flag. From the docs:
>>
>> This toggles the Rd/Wr flag. That is, if you want to do a write, but
>>     need to emit an Rd instead of a Wr, or vice versa, you set this
>>     flag. For example:
>> S Addr Rd [A] Data [A] Data [A] ... [A] Data [A] P
>>
>> I don't think our hardware supports this type of operation.
> I'd think something like this should do:
>
> if (msg->flags & I2C_M_REV_DIR_ADDR)
> cmd ^= I2C_CMD_READ;

I meant that the hardware cannot interpret this, it would be a
meaningless command unfortunately.

>

\
 
 \ /
  Last update: 2018-07-05 20:54    [W:0.101 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site