lkml.org 
[lkml]   [2018]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 01/10] MIPS: mscc: ocelot: make HSIO registers address range a syscon
Date
HSIO contains registers for PLL5 configuration, SerDes/switch port
muxing and a thermal sensor, hence we can't keep it in the switch DT
node.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
---
arch/mips/boot/dts/mscc/ocelot.dtsi | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index afe8fc9..c51663a 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -96,7 +96,6 @@
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
<0x1080000 0x100>,
- <0x10d0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
@@ -110,10 +109,10 @@
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
- reg-names = "sys", "rew", "qs", "hsio", "port0",
- "port1", "port2", "port3", "port4", "port5",
- "port6", "port7", "port8", "port9", "port10",
- "qsys", "ana";
+ reg-names = "sys", "rew", "qs", "port0", "port1",
+ "port2", "port3", "port4", "port5", "port6",
+ "port7", "port8", "port9", "port10", "qsys",
+ "ana";
interrupts = <21 22>;
interrupt-names = "xtr", "inj";

@@ -220,5 +219,10 @@
pinctrl-0 = <&miim1>;
status = "disabled";
};
+
+ hsio: syscon@10d0000 {
+ compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+ reg = <0x10d0000 0x10000>;
+ };
};
};
--
git-series 0.9.1
\
 
 \ /
  Last update: 2018-07-30 14:46    [W:0.219 / U:2.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site