lkml.org 
[lkml]   [2018]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 8/9] clk: actions: Add Actions Semi S700 SoC Reset Management Unit support
From
Date
On Sat, 2018-07-28 at 00:15 +0530, Manivannan Sadhasivam wrote:
> Add Reset Management Unit (RMU) support for Actions Semi S700 SoC.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
> drivers/clk/actions/owl-s700.c | 51 ++++++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
> index e7cacd677275..d9c0c7870135 100644
> --- a/drivers/clk/actions/owl-s700.c
> +++ b/drivers/clk/actions/owl-s700.c
> @@ -20,8 +20,10 @@
> #include "owl-gate.h"
> #include "owl-mux.h"
> #include "owl-pll.h"
> +#include "owl-reset.h"
>
> #include <dt-bindings/clock/actions,s700-cmu.h>
> +#include <dt-bindings/reset/actions,s700-reset.h>
>
> #define CMU_COREPLL (0x0000)
> #define CMU_DEVPLL (0x0004)
> @@ -569,20 +571,69 @@ static struct clk_hw_onecell_data s700_hw_clks = {
> .num = CLK_NR_CLKS,
> };
>
> +static struct owl_reset_map s700_resets[] = {

This could be
static const struct owl_reset_map s700_resets[] = {

> + [RESET_DE] = { CMU_DEVRST0, BIT(0) },
> + [RESET_LCD0] = { CMU_DEVRST0, BIT(1) },
> + [RESET_DSI] = { CMU_DEVRST0, BIT(2) },
> + [RESET_CSI] = { CMU_DEVRST0, BIT(13) },
> + [RESET_SI] = { CMU_DEVRST0, BIT(14) },
> + [RESET_I2C0] = { CMU_DEVRST1, BIT(0) },
> + [RESET_I2C1] = { CMU_DEVRST1, BIT(1) },
> + [RESET_I2C2] = { CMU_DEVRST1, BIT(2) },
> + [RESET_I2C3] = { CMU_DEVRST1, BIT(3) },
> + [RESET_SPI0] = { CMU_DEVRST1, BIT(4) },
> + [RESET_SPI1] = { CMU_DEVRST1, BIT(5) },
> + [RESET_SPI2] = { CMU_DEVRST1, BIT(6) },
> + [RESET_SPI3] = { CMU_DEVRST1, BIT(7) },
> + [RESET_UART0] = { CMU_DEVRST1, BIT(8) },
> + [RESET_UART1] = { CMU_DEVRST1, BIT(9) },
> + [RESET_UART2] = { CMU_DEVRST1, BIT(10) },
> + [RESET_UART3] = { CMU_DEVRST1, BIT(11) },
> + [RESET_UART4] = { CMU_DEVRST1, BIT(12) },
> + [RESET_UART5] = { CMU_DEVRST1, BIT(13) },
> + [RESET_UART6] = { CMU_DEVRST1, BIT(14) },
> + [RESET_KEY] = { CMU_DEVRST1, BIT(24) },
> + [RESET_GPIO] = { CMU_DEVRST1, BIT(25) },
> + [RESET_AUDIO] = { CMU_DEVRST1, BIT(29) },
> +};
> +
> static struct owl_clk_desc s700_clk_desc = {
> .clks = s700_clks,
> .num_clks = ARRAY_SIZE(s700_clks),
>
> .hw_clks = &s700_hw_clks,
> +
> + .resets = s700_resets,
> + .num_resets = ARRAY_SIZE(s700_resets),
> };
>
> static int s700_clk_probe(struct platform_device *pdev)
> {
> struct owl_clk_desc *desc;
> + struct owl_reset *reset;
> + int ret;
>
> desc = &s700_clk_desc;
> owl_clk_regmap_init(pdev, desc);
>
> + /*
> + * FIXME: Reset controller registration should be moved to
> + * common code, once all SoCs of Owl family supports it.
> + */
> + reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
> + if (!reset)
> + return -ENOMEM;
> +
> + reset->rcdev.of_node = pdev->dev.of_node;
> + reset->rcdev.ops = &owl_reset_ops;
> + reset->rcdev.nr_resets = desc->num_resets;
> + reset->reset_map = desc->resets;
> + reset->regmap = desc->regmap;
> +
> + ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev);
> + if (ret)
> + dev_err(&pdev->dev, "Failed to register reset controller\n");
> +
> return owl_clk_probe(&pdev->dev, desc->hw_clks);
> }

regards
Philipp

\
 
 \ /
  Last update: 2018-07-30 12:41    [W:0.215 / U:0.780 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site