lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/15] Introduce Cadence USBSSP DRD driver - added gadget-ext-caps.h
Date
Signed-off-by: Laszczak Pawel <pawell@cadence.com>
---
drivers/usb/usbssp/gadget-ext-caps.h | 99 ++++++++++++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 drivers/usb/usbssp/gadget-ext-caps.h

diff --git a/drivers/usb/usbssp/gadget-ext-caps.h b/drivers/usb/usbssp/gadget-ext-caps.h
new file mode 100644
index 000000000000..3b1f7b046440
--- /dev/null
+++ b/drivers/usb/usbssp/gadget-ext-caps.h
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * USBSSP device controller driver
+ *
+ * Copyright (C) 2018 Cadence.
+ *
+ * Author: Pawel Laszczak
+ * Some code borrowed from the Linux XHCI driver.
+ */
+
+/* Up to 16 ms to halt an DC */
+#define USBSSP_MAX_HALT_USEC (16*1000)
+
+/* DC not running - set to 1 when run/stop bit is cleared. */
+#define USBSSP_STS_HALT (1<<0)
+
+/* HCCPARAMS offset from PCI base address */
+#define USBSSP_HCC_PARAMS_OFFSET 0x10
+/* HCCPARAMS contains the first extended capability pointer */
+#define USBSSP_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
+
+/* Command and Status registers offset from the Operational Registers address */
+#define USBSSP_CMD_OFFSET 0x00
+#define USBSSP_STS_OFFSET 0x04
+
+/* Capability Register */
+/* bits 7:0 - how long is the Capabilities register */
+#define USBSSP_HC_LENGTH(p) (((p)>>00)&0x00ff)
+
+/* Extended capability register fields */
+#define USBSSP_EXT_CAPS_ID(p) (((p)>>0)&0xff)
+#define USBSSP_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
+#define v_EXT_CAPS_VAL(p) ((p)>>16)
+/* Extended capability IDs - ID 0 reserved */
+#define USBSSP_EXT_CAPS_PROTOCOL 2
+
+/* USB 2.0 hardware LMP capability*/
+#define USBSSP_HLC (1 << 19)
+#define USBSSP_BLC (1 << 20)
+
+/* command register values to disable interrupts and halt the DC */
+/* start/stop DC execution - do not write unless DC is halted*/
+#define USBSSP_CMD_RUN (1 << 0)
+/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
+#define USBSSP_CMD_EIE (1 << 2)
+/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
+#define USBSSP_CMD_HSEIE (1 << 3)
+/* Enable Wrap Event - '1' means DC generates an event when MFINDEX wraps. */
+#define USBSSP_CMD_EWE (1 << 10)
+
+#define USBSSP_IRQS (USBSSP_CMD_EIE | USBSSP_CMD_HSEIE | USBSSP_CMD_EWE)
+
+/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
+#define USBSSP_STS_CNR (1 << 11)
+
+#include <linux/io.h>
+
+/**
+ * Find the offset of the extended capabilities with capability ID id.
+ *
+ * @base PCI MMIO registers base address.
+ * @start address at which to start looking, (0 or HCC_PARAMS to start at
+ * beginning of list)
+ * @id Extended capability ID to search for.
+ *
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times,
+ * e.g., the USBSSP_EXT_CAPS_PROTOCOL, and this provides a way to find them all.
+ */
+
+static inline int usbssp_find_next_ext_cap(
+ void __iomem *base, u32 start, int id)
+{
+ u32 val;
+ u32 next;
+ u32 offset;
+
+ offset = start;
+ if (!start || start == USBSSP_HCC_PARAMS_OFFSET) {
+ val = readl(base + USBSSP_HCC_PARAMS_OFFSET);
+ if (val == ~0)
+ return 0;
+ offset = USBSSP_HCC_EXT_CAPS(val) << 2;
+ if (!offset)
+ return 0;
+ };
+ do {
+ val = readl(base + offset);
+ if (val == ~0)
+ return 0;
+ if (USBSSP_EXT_CAPS_ID(val) == id && offset != start)
+ return offset;
+
+ next = USBSSP_EXT_CAPS_NEXT(val);
+ offset += next << 2;
+ } while (next);
+
+ return 0;
+}
--
2.17.1
\
 
 \ /
  Last update: 2018-07-03 22:02    [W:0.192 / U:1.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site