lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: omap5 fixing palmas IRQ_TYPE_NONE warning leads to gpadc timeouts
Hi Tony,

On Tue, Jul 3, 2018 at 10:45 AM Tony Lindgren <tony@atomide.com> wrote:
>
> * Belisko Marek <marek.belisko@gmail.com> [180620 09:40]:
> > Hello,
> >
> > I'm trying to fix warning (for omap5 board) produced by recent change
> > to avoid using IRQ_TYPE_NONE like:
> > [ 1.818666] WARNING: CPU: 1 PID: 778 at
> > drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0x78/0x100
> > [ 1.828839] Modules linked in:
> >
> > I did look to other commit which did update and without deep knowledge
> > I just simply do this small change:
> > diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi
> > b/arch/arm/boot/dts/omap5-board-common.dtsi
> > index 218892b..ab2df8c 100644
> > --- a/arch/arm/boot/dts/omap5-board-common.dtsi
> > +++ b/arch/arm/boot/dts/omap5-board-common.dtsi
> > @@ -393,7 +393,7 @@
> >
> > palmas: palmas@48 {
> > compatible = "ti,palmas";
> > - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
> > + interrupts = <GIC_SPI 7 IRQ_TYPE_HIGH>; /* IRQ_SYS_1N */
> > reg = <0x48>;
> > interrupt-controller;
> > #interrupt-cells = <2>;
> >
> > and it looks board boots fine. Only issue is that gpadc driver is not
> > working (at least not getting interrupts at all ADC fails with
> > timeout). I did look to gpadc driver and driver is not using
> > interrupts defined in dts but request interrupt directly from palmas
> > mfd module. Any ideas what needs to be changed to have gpadc again
> > working with mentioned patch?
>
> Can you try with IRQF_TRIGGER_HIGH added also to the flags to
> regmap_add_irq_chip() in drivers/mfd/palmas.c?
Nope issue is till present also after this change like:
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi
b/arch/arm/boot/dts/omap5-board-common.dtsi
index 218892b..6912769 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -393,7 +393,7 @@

palmas: palmas@48 {
compatible = "ti,palmas";
- interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
reg = <0x48>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -432,9 +432,9 @@

gpadc: gpadc {
compatible = "ti,palmas-gpadc";
- interrupts = <18 0
- 16 0
- 17 0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH
+ 16 IRQ_TYPE_LEVEL_HIGH
+ 17 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
ti,channel0-current-microamp = <5>;
ti,channel3-current-microamp = <10>;
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 663a239..15d23db 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -601,7 +601,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
regmap_write(palmas->regmap[slave], addr, reg);

ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
- IRQF_ONESHOT | pdata->irq_flags, 0,
+ IRQF_ONESHOT | IRQF_TRIGGER_HIGH |
pdata->irq_flags, 0,
driver_data->irq_chip, &palmas->irq_data);
if (ret < 0)
goto err_i2c;
>
> Regards,
>
> Tony

BR,

marek

\
 
 \ /
  Last update: 2018-07-03 20:32    [W:0.104 / U:1.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site