lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH linux-next v6 01/13] dt-bindings: Add a document of PECI subsystem
From
Date
Hi Rob,

Thanks for the review. Please see my inline answer.

On 7/3/2018 9:47 AM, Rob Herring wrote:
> On Thu, Jun 21, 2018 at 12:39:47PM -0700, Jae Hyun Yoo wrote:
>> This commit adds a document of generic PECI bus, adapter and client
>> driver.
>>
>> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
>> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
>> Reviewed-by: James Feist <james.feist@linux.intel.com>
>> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
>> Cc: Andrew Jeffery <andrew@aj.id.au>
>> Cc: Joel Stanley <joel@jms.id.au>
>> ---
>> .../devicetree/bindings/peci/peci.txt | 60 +++++++++++++++++++
>> 1 file changed, 60 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/peci/peci.txt
>>
>> diff --git a/Documentation/devicetree/bindings/peci/peci.txt b/Documentation/devicetree/bindings/peci/peci.txt
>> new file mode 100644
>> index 000000000000..5583aa80b78a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/peci/peci.txt
>> @@ -0,0 +1,60 @@
>> +Generic device tree configuration for PECI buses
>> +================================================
>> +
>> +Required properties:
>> +- compatible : Should be "simple-bus".
>> +- #address-cells : Should be present if the device has sub-nodes.
>> +- #size-cells : Should be present if the device has sub-nodes.
>> +- ranges : Should contain PECI controller registers ranges.
>> +
>> +Example:
>> + peci: peci@10000000 {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10000000 0x1000>;
>> + };
>
> I don't think you need this section. It's just the parent of the
> controller, right?
>

Right. I'll drop this section out.

Thanks a lot,

Jae

>> +
>> +Generic device tree configuration for PECI adapters
>> +===================================================
>> +
>> +Required properties:
>> +- #address-cells : Should be <1>. Read more about client addresses below.
>> +- #size-cells : Should be <0>. Read more about client addresses below.
>> +
>> +The cells properties above define that an address of CPU clients of a PECI bus
>> +are described by a single value.
>> +
>> +Example:
>> + peci0: peci-bus@0 {
>> + compatible = "vendor,soc-peci";
>> + reg = <0x0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + };
>> +
>> +Generic device tree configuration for PECI clients
>> +==================================================
>> +
>> +Required properties:
>> +- compatible : Should contain name of PECI client.
>> +- reg : Should contain address of a client CPU. Address range of CPU
>> + clients starts from 0x30 based on PECI specification.
>> +
>> +Example:
>> + peci-bus@0 {
>> + compatible = "vendor,soc-peci";
>> + reg = <0x0 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + peci-client@30 {
>> + compatible = "vendor,peci-client";
>> + reg = <0x30>;
>> + };
>> +
>> + peci-client@31 {
>> + compatible = "vendor,peci-client";
>> + reg = <0x31>;
>> + };
>> + };
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2018-07-03 18:59    [W:0.057 / U:4.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site