lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 08/18] net: davinci_emac: potentially get the MAC address from MTD
From
Date


On 06/29/2018 02:40 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>
> On da850-evm board we can read the MAC address from MTD. It's currently
> done in the relevant board file, but we want to get rid of all the MAC
> reading callbacks from the board file (SPI and NAND). Move the reading
> of the MAC address from SPI to the emac driver's probe function.

This should be made something generic to all drivers, not just something
the davinci_emac driver does, something like this actually:

https://lkml.org/lkml/2018/3/24/312

>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
> drivers/net/ethernet/ti/davinci_emac.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
> index a1a6445b5a7e..48e6a7755811 100644
> --- a/drivers/net/ethernet/ti/davinci_emac.c
> +++ b/drivers/net/ethernet/ti/davinci_emac.c
> @@ -67,7 +67,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_net.h>
> #include <linux/mfd/syscon.h>
> -
> +#include <linux/mtd/mtd.h>
> #include <asm/irq.h>
> #include <asm/page.h>
>
> @@ -1783,7 +1783,10 @@ static int davinci_emac_probe(struct platform_device *pdev)
> struct cpdma_params dma_params;
> struct clk *emac_clk;
> unsigned long emac_bus_frequency;
> -
> +#ifdef CONFIG_MTD
> + size_t mac_addr_len;
> + struct mtd_info *mtd;
> +#endif /* CONFIG_MTD */
>
> /* obtain emac clock from kernel */
> emac_clk = devm_clk_get(&pdev->dev, NULL);
> @@ -1815,6 +1818,19 @@ static int davinci_emac_probe(struct platform_device *pdev)
> goto err_free_netdev;
> }
>
> +#ifdef CONFIG_MTD
> + mtd = get_mtd_device_nm("MAC-Address");
> + if (!IS_ERR(mtd)) {
> + rc = mtd_read(mtd, 0, ETH_ALEN,
> + &mac_addr_len, priv->mac_addr);
> + if (rc == 0)
> + dev_info(&pdev->dev,
> + "Read MAC addr from SPI Flash: %pM\n",
> + priv->mac_addr);
> + put_mtd_device(mtd);
> + }
> +#endif /* CONFIG_MTD */
> +
> /* MAC addr and PHY mask , RMII enable info from platform_data */
> memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
> priv->phy_id = pdata->phy_id;
>

--
Florian

\
 
 \ /
  Last update: 2018-07-03 18:40    [W:0.256 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site