[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 3/3] pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant
Quoting Douglas Anderson (2018-07-02 15:59:39)
> If you do this on an sdm845 board:
> grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups
> looks like nonsense. For every pin you see listed:
> input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ...
> That's because pmic_gpio_config_get() isn't complying with the rules
> that pinconf_generic_dump_one() expects. Specifically for boolean
> parameters (anything with a "struct pin_config_item" where has_arg is
> false) the function expects that the function should return its value
> not through the "config" parameter but should return "0" if the value
> is set and "-EINVAL" if the value isn't set.
> Let's fix this.
> From a quick sample of other pinctrl drivers, it appears to be
> tradition to also return 1 through the config parameter for these
> boolean parameters when they exist. I'm not one to knock tradition,
> so I'll follow tradition and return 1 in these cases. While I'm at
> it, I'll also continue searching for four leaf clovers, kocking on

Small typo here.

> wood three times, and trying not to break mirrors.
> NOTE: This also fixes an apparent typo for reading
> PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally
> using "=" instead of "==" and thus was setting some internal
> state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops.


> Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver")
> Signed-off-by: Douglas Anderson <>

We should fix the ssbi-gpio/mpp and spmi-mpp drivers too. All those
drivers are designed on the same buggy original driver.

 \ /
  Last update: 2018-07-03 08:10    [W:0.099 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site