lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCHv6 0/8] Add Intel Stratix10 FPGA manager and service layer
Date
From: Richard Gong <richard.gong@intel.com>

This is the 6th submission of Intel stratix10 service layer patches. Intel
Stratix10 FPGA manager, which is 1st Stratix10 service layer client, is
included in this submission.

Stratix10 service layer patches have been reviewed internally by Alan Tull
and other colleagues at Intel.

Some features of the Intel Stratix10 SoC require a level of privilege
higher than the kernel is granted. Such secure features include
FPGA programming. In terms of the ARMv8 architecture, the kernel runs
at Exception Level 1 (EL1), access to the features requires
Exception Level 3 (EL3).

The Intel Stratix10 service layer provides an in kernel API for drivers to
request access to the secure features. The requests are queued and
processed one by one. ARM’s SMCCC is used to pass the execution of the
requests on to a secure monitor (EL3).

Later the Intel Stratix10 service layer driver will be extended to provide
services for QSPI, Crypto and warm reset.

v2: add patches for FPGA manager, FPGA manager binding, dts and defconfig
remove intel-service subdirectory and intel-service.h, move intel-smc.h
and intel-service.c to driver/misc subdirectory
remove global variables
change service layer driver be 'default n'
correct SPDX markers
add timeout for do..while() loop
add kernel-doc for the functions and structs, correct multiline comments
replace kfifo_in/kfifo_out with kfifo_in_spinlocked/kfifo_out_spinlocked
rename struct intel_svc_data (at client header) to intel_svc_client_msg
rename struct intel_svc_private_mem to intel_svc_data
other corrections/changes from Intel internal code reviews
v3: change all exported functions with "intel_svc_" as the prefix
increase timeout values for claiming back submitted buffer(s)
rename struct intel_command_reconfig_payload to
struct intel_svc_command_reconfig_payload
add pr_err() to provide the error return value
change to put fpga_mgr node under firmware/svc node
change to FPGA manager to align the update of service client APIs, and the
update of fpga_mgr device node
Other corrections/changes
v4: s/intel/stratix10/ on some variables, structs, functions, and file names
intel-service.c -> stratix10-svc.c
intel-smc.h -> stratix10-smc.h
intel-service-client.h -> stratix10-svc-client.h
remove non-kernel-doc formatting
s/fpga-mgr@0/fpga-mgr/ to remove unit_address at fpga_mgr node
add Rob's Reviewed-by
add Richard's signed-off-by
v5: add a new API statix10_svc_done() which is called by service client
when client request is completed or error occurs during request
process. Which allows service layer to free its resources.
remove dummy client from service layer client header and service layer
source file.
add Rob's Reviewed-by
add a new file stratix10-svc.rst and add that to driver-api/index.rst
kernel-doc fixes
v6: replace kthread_create_on_cpu() with kthread_create_on_node()
extend stratix_svc_send() to support service client which doesn't use
memory allocated by service layer
add S10_RECONFIG_TIMEOUT
rename s/S10_BUF_TIMEOUT/S10_BUFFER_TIMEOUT/
fix service layer and FPGA manager Klocwork errors

Alan Tull (3):
dt-bindings: fpga: add Stratix10 SoC FPGA manager binding
arm64: dts: stratix10: add fpga manager and region
fpga: add intel stratix10 soc fpga manager driver

Richard Gong (5):
dt-bindings, firmware: add Intel Stratix10 service layer binding
arm64: dts: stratix10: add stratix10 service driver binding to base
dtsi
driver, misc: add Intel Stratix10 service layer driver
defconfig: enable fpga and service layer
Documentation: driver-api: add stratix10 service layer

.../bindings/firmware/intel,stratix10-svc.txt | 57 ++
.../bindings/fpga/intel-stratix10-soc-fpga-mgr.txt | 17 +
Documentation/driver-api/index.rst | 1 +
Documentation/driver-api/stratix10-svc.rst | 32 +
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 48 +
arch/arm64/configs/defconfig | 6 +
drivers/fpga/Kconfig | 6 +
drivers/fpga/Makefile | 1 +
drivers/fpga/stratix10-soc.c | 553 +++++++++++
drivers/misc/Kconfig | 12 +
drivers/misc/Makefile | 1 +
drivers/misc/stratix10-smc.h | 205 ++++
drivers/misc/stratix10-svc.c | 1000 ++++++++++++++++++++
include/linux/stratix10-svc-client.h | 201 ++++
14 files changed, 2140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
create mode 100644 Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
create mode 100644 Documentation/driver-api/stratix10-svc.rst
create mode 100644 drivers/fpga/stratix10-soc.c
create mode 100644 drivers/misc/stratix10-smc.h
create mode 100644 drivers/misc/stratix10-svc.c
create mode 100644 include/linux/stratix10-svc-client.h

--
2.7.4

\
 
 \ /
  Last update: 2018-07-03 16:43    [W:0.207 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site