lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 6/6] crypto: qcom: Add ACPI support
Date
From: Timur Tabi <timur@codeaurora.org>

Add support for probing on ACPI systems, with ACPI HID QCOM8160.

On ACPI systems, clocks are always enabled, the PRNG should
already be enabled, and the register region is read-only.
The driver only verifies that the hardware is already
enabled never tries to disable or configure it.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
[port to crypto API]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/crypto/qcom-rng.c | 37 +++++++++++++++++++++++++++++++++----
1 file changed, 33 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
index fdbbcac7bcb8..bc0131d130d6 100644
--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -4,6 +4,7 @@
// Based on msm-rng.c and downstream driver

#include <crypto/internal/rng.h>
+#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/crypto.h>
#include <linux/module.h>
@@ -154,6 +155,7 @@ static int qcom_rng_probe(struct platform_device *pdev)
{
struct resource *res;
struct qcom_rng *rng;
+ u32 val;
int ret;

rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
@@ -168,11 +170,27 @@ static int qcom_rng_probe(struct platform_device *pdev)
if (IS_ERR(rng->base))
return PTR_ERR(rng->base);

- rng->clk = devm_clk_get(&pdev->dev, "core");
- if (IS_ERR(rng->clk))
- return PTR_ERR(rng->clk);

- rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
+ /*
+ * ACPI systems have v2 hardware. The clocks are always enabled,
+ * the PRNG register space is read-only and the PRNG should
+ * already be enabled.
+ */
+ if (has_acpi_companion(&pdev->dev)) {
+ val = readl(rng->base + PRNG_CONFIG);
+ if (!(val & PRNG_CONFIG_HW_ENABLE)) {
+ dev_err(&pdev->dev, "device is not enabled\n");
+ return -ENODEV;
+ }
+ rng->skip_init = 1;
+ } else {
+ rng->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(rng->clk))
+ return PTR_ERR(rng->clk);
+
+ rng->skip_init =
+ (unsigned long)of_device_get_match_data(&pdev->dev);
+ }

qcom_rng_dev = rng;
ret = crypto_register_rng(&qcom_rng_alg);
@@ -193,6 +211,16 @@ static int qcom_rng_remove(struct platform_device *pdev)
return 0;
}

+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id qcom_rng_acpi_match[] = {
+ {
+ .id = "QCOM8160",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, msm_rng_acpi_match);
+#endif
+
static const struct of_device_id qcom_rng_of_match[] = {
{ .compatible = "qcom,prng", .data = (void *)0},
{ .compatible = "qcom,prng-ee", .data = (void *)1},
@@ -206,6 +234,7 @@ static struct platform_driver qcom_rng_driver = {
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = of_match_ptr(qcom_rng_of_match),
+ .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
}
};
module_platform_driver(qcom_rng_driver);
--
2.14.4
\
 
 \ /
  Last update: 2018-07-03 08:06    [W:0.180 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site