lkml.org 
[lkml]   [2018]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] ASoC: es7241: add dt-bindings documentation for the es7241 adc
Date
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
.../devicetree/bindings/sound/everest,es7241.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/everest,es7241.txt

diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.txt b/Documentation/devicetree/bindings/sound/everest,es7241.txt
new file mode 100644
index 000000000000..28f82cf4959f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es7241.txt
@@ -0,0 +1,28 @@
+ES7241 i2s AD converter
+
+Required properties:
+- compatible : "everest,es7241"
+- VDDP-supply: regulator phandle for the VDDA supply
+- VDDA-supply: regulator phandle for the VDDP supply
+- VDDD-supply: regulator phandle for the VDDD supply
+
+Optional properties:
+- reset-gpios: gpio connected to the reset pin
+- m0-gpios : gpio connected to the m0 pin
+- m1-gpios : gpio connected to the m1 pin
+- everest,sdout-pull-down:
+ Format used by the serial interface is controlled by pulling
+ the sdout. If the sdout is pulled down, leftj format is used.
+ If this property is not provided, sdout is assumed to pulled
+ up and i2s format is used
+
+Example:
+
+linein: audio-codec@2 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7241";
+ VDDA-supply = <&vcc_3v3>;
+ VDDP-supply = <&vcc_3v3>;
+ VDDD-supply = <&vcc_3v3>;
+ reset-gpios = <&gpio GPIOH_42>;
+};
--
2.14.4
\
 
 \ /
  Last update: 2018-07-03 15:29    [W:0.078 / U:4.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site